Gooday,
im using OpenWrt Attitude Adjustment 12.09-rc1 on a soekris 5501 with
compact flash.
Almost everything is working great, there's 1 point which i can't
figure out how to resolve.
When i want to reboot the device it looks like it's hanging, and it
only reboots when i do a poer-off and poweron again.
This is happening for tboth the reboot command via cli and via the web
interface.
Can somebody help me in fixing this issue.
please see what hapens below (i've attached a serial console cable to
catch the output, this is from providing the reboot via the
webinterface
root@OpenWrt:/#
root@OpenWrt:/#
root@OpenWrt:/#
root@OpenWrt:/# [ 414.390281] br-lan: port 3(eth3) entered disabled state
[ 414.433087] device eth1 left promiscuous mode
[ 414.459325] br-lan: port 1(eth1) entered disabled state
[ 414.539352] device eth2 left promiscuous mode
[ 414.565600] br-lan: port 2(eth2) entered disabled state
[ 414.598726] device eth3 left promiscuous mode
[ 414.624977] br-lan: port 3(eth3) entered disabled state
[ 416.912473] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 416.943862] Restarting system.
[ 416.953347] machine restart
..... NOW IT COMPLETELY HANGD AND IS WAITING FOREVER.........
..... REPLUG OF THE POWER CABLE .........
POST: 012345689bcefghips1234ajklnopqr,,,tvwxy
comBIOS ver. 1.33c 20080626 Copyright (C) 2000-2008 Soekris Engineering.
net5501
0512 Mbyte Memory CPU Geode LX 500 Mhz
Pri Mas SanDisk SDCFH-004G LBA Xlt 968-128-63 3906 Mbyte
Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int
-------------------------------------------------------------------
0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10
0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11
0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05
0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09
0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12
0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101
0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000
0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0005000 00000000 15
0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15
1 Seconds to automatic boot. Press Ctrl-P for entering Monitor.
GRUB Loading stage1.5.
GRUB loading, please wait...
GNU GRUB version 0.97 (639K lower / 523264K upper memory)
+-------------------------------------------------------------------------+
| OpenWrt |
| OpenWrt (failsafe) |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+-------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, or 'c' for a command-line.
The highlighted entry will be booted automatically in 1 seconds.
Booting 'OpenWrt'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz block2mtd.block2mtd=/dev/sda2,131072,rootfs root=/dev/mtd
block0 rootfstype=jffs2 rootwait console=ttyS0,19200n8 noinitrd reboot=bios
[Linux-bzImage, setup=0x3a00, size=0x1434c0]
boot
[ 0.000000] Linux version 3.3.8 (blogic@buildserver-1) (gcc
version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue
Nov 13 17:39:41 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x100000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[ 0.000000] 512MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 20000000
[ 0.000000] low ram: 0 - 20000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00020000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] Using APIC driver default
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:dff00000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 129935
[ 0.000000] Kernel command line:
block2mtd.block2mtd=/dev/sda2,131072,rootfs root=/dev/mtdblock0
rootfstype=jffs2 rootwait console=ttyS0,19200n8 noinitrd reboot=bios
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 515888k/524288k available (2305k kernel code,
7948k reserved, 645k data, 204k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xfffa2000 ( 503 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] .init : 0xc12e2000 - 0xc1315000 ( 204 kB)
[ 0.000000] .data : 0xc12404dc - 0xc12e1a40 ( 645 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12404dc (2305 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 499.915 MHz processor.
[ 0.030006] Calibrating delay loop (skipped), value calculated
using timer frequency.. 999.83 BogoMIPS (lpj=4999150)
[ 0.050010] pid_max: default: 32768 minimum: 301
[ 0.060247] Mount-cache hash table entries: 512
[ 0.070423] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
[ 0.100161] Performance Events: no PMU driver, software events only.
[ 0.120913] NET: Registered protocol family 16
[ 0.132830] PCI: PCI BIOS revision 2.01 entry at 0xfac61, last bus=0
[ 0.140013] PCI: Using configuration type 1 for base access
[ 0.162964] bio: create slab <bio-0> at 0
[ 0.171150] SCSI subsystem initialized
[ 0.180996] PCI: Probing PCI hardware
[ 0.190222] PCI host bridge to bus 0000:00
[ 0.200020] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.210015] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.230477] pci 0000:00:14.0: CS5536 ISA bridge bug detected
(incorrect header); workaround applied.
[ 0.253349] Switching to clocksource pit
[ 0.262245] NET: Registered protocol family 2
[ 0.268522] IP route cache hash table entrie ^[[9;1R^[[9;1R^[[2;2R[
7.624306] geode-aes: GEODE AES engine enabled.
[ 7.671543] ocf: module license 'BSD' taints kernel.
[ 7.701291] Disabling lock debugging due to kernel taint
[ 7.820975] Compat-drivers backport release:
compat-drivers-2012-09-04-2-gddac993
[ 7.865794] Backport based on wireless-testing.git master-2012-09-07
[ 7.903833] compat.git: wireless-testing.git
[ 8.021049] cfg80211: Calling CRDA to update world regulatory domain
[ 8.059202] cfg80211: World regulatory domain updated:
[ 8.089962] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 8.138941] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 8.185319] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 8.231690] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 8.278065] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 8.324438] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 8.509104] usbcore: registered new interface driver usbfs
[ 8.542090] usbcore: registered new interface driver hub
[ 8.574915] usbcore: registered new device driver usb
[ 9.079662] NET: Registered protocol family 8
[ 9.105814] NET: Registered protocol family 20
[ 9.154544] Button Hotplug driver version 0.4.1
[ 9.214579] PPP generic driver version 2.4.2
[ 9.269419] tun: Universal TUN/TAP device driver, 1.6
[ 9.299687] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 9.348263] PPP MPPE Compression module registered
[ 9.395841] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[ 9.438645] platform pc8736x_gpio.0: GPIO ioport 6600 reserved
[ 9.522354] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.657476] NET: Registered protocol family 24
[ 9.712870] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.752267] ehci_hcd 0000:00:15.1: EHCI Host Controller
[ 9.783673] ehci_hcd 0000:00:15.1: new USB bus registered, assigned
bus number 1
[ 9.853161] ehci_hcd 0000:00:15.1: irq 15, io mem 0xa0006000
[ 9.903071] ehci_hcd 0000:00:15.1: USB 2.0 started, EHCI 1.00
[ 9.938057] hub 1-0:1.0: USB hub found
[ 9.960531] hub 1-0:1.0: 4 ports detected
[ 10.029730] nf_conntrack version 0.5.0 (8063 buckets, 32252 max)
[ 10.253679] cs5535-mfd 0000:00:14.0: 5 devices registered.
[ 10.298508] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io
0x6200-0x63ff]
[ 10.344439] cs5535-mfgpt cs5535-mfgpt: 8 MFGPT timers available
[ 10.413224] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 10.531743] xt_time: kernel timezone is -0000
[ 10.664355] cs5535-mfgpt cs5535-mfgpt: registered timer 0
[ 10.696737] cs5535-clockevt: Registering MFGPT timer as a clock
event, using IRQ 7
[ 10.753153] cs5535-gpio cs5535-gpio: reserved resource region [io
0x6100-0x61ff]
[ 10.798195] gpiochip_add: registered GPIOs 0 to 31 on device: cs5535-gpio
[ 10.855332] pc87360: Device 0x09 not activated
[ 10.932584] Solos PCI Driver Version 0.07
[ 10.975760] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.013150] ohci_hcd 0000:00:15.0: OHCI Host Controller
[ 11.044582] ohci_hcd 0000:00:15.0: new USB bus registered, assigned
bus number 2
[ 11.089049] ohci_hcd 0000:00:15.0: irq 15, io mem 0xa0005000
[ 11.214123] hub 2-0:1.0: USB hub found
[ 11.236708] hub 2-0:1.0: 4 ports detected
[ 11.282110] uhci_hcd: USB Universal Host Controller Interface driver
[ 11.341275] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 11.387493] via-rhine 0000:00:06.0: eth0: VIA Rhine III (Management
Adapter) at 0xa0004000, 00:00:24:ca:92:8c, IRQ 11
[ 11.451938] via-rhine 0000:00:06.0: eth0: MII PHY found at address
1, status 0x7869 advertising 05e1 Link cde1
[ 11.517729] via-rhine 0000:00:07.0: eth1: VIA Rhine III (Management
Adapter) at 0xa0004100, 00:00:24:ca:92:8d, IRQ 5
[ 11.581627] via-rhine 0000:00:07.0: eth1: MII PHY found at address
1, status 0x7849 advertising 05e1 Link 0000
[ 11.647454] via-rhine 0000:00:08.0: eth2: VIA Rhine III (Management
Adapter) at 0xa0004200, 00:00:24:ca:92:8e, IRQ 9
[ 11.711341] via-rhine 0000:00:08.0: eth2: MII PHY found at address
1, status 0x7849 advertising 05e1 Link 0000
[ 11.777167] via-rhine 0000:00:09.0: eth3: VIA Rhine III (Management
Adapter) at 0xa0004300, 00:00:24:ca:92:8f, IRQ 12
[ 11.841597] via-rhine 0000:00:09.0: eth3: MII PHY found at address
1, status 0x7869 advertising 05e1 Link cde1
[ 11.914041] cs5535-mfgpt cs5535-mfgpt: registered timer 1
[ 11.977285] i2c /dev entries driver
[ 12.050276] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
[ 12.124939] usbserial: Unknown parameter `maxSize'
[ 13.965276] 8021q: adding VLAN 0 to HW filter on device eth1
[ 14.009577] device eth1 entered promiscuous mode
[ 14.042643] 8021q: adding VLAN 0 to HW filter on device eth2
[ 14.087027] device eth2 entered promiscuous mode
[ 14.124087] 8021q: adding VLAN 0 to HW filter on device eth3
[ 14.204451] device eth3 entered promiscuous mode
[ 14.232380] br-lan: port 3(eth3) entered forwarding state
[ 14.264834] br-lan: port 3(eth3) entered forwarding state
[ 14.314347] 8021q: adding VLAN 0 to HW filter on device eth0
[ 15.982793] usb 1-1: USB disconnect, device number 2
[ 16.296044] br-lan: port 3(eth3) entered forwarding state
[ 21.044963] usb 1-1: new high-speed USB device number 3 using ehci_hcd
BusyBox v1.19.4 (2012-10-15 04:20:52 UTC) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
ATTITUDE ADJUSTMENT (12.09-rc1, r34185)
-----------------------------------------------------
* 1/4 oz Vodka Pour all ingredients into mixing
* 1/4 oz Gin tin with ice, strain into glass.
* 1/4 oz Amaretto
* 1/4 oz Triple sec
* 1/4 oz Peach schnapps
* 1/4 oz Sour mix
* 1 splash Cranberry juice
-----------------------------------------------------
root@OpenWrt:/#
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-users
