Hi folks,
Hopefully this is a easy one for you.
I've got a TL-1043ND running Barrier Breaker (r39440). This router has 3
detachable antennas and I have removed all of them in order to be able
to use an external Sectorial antenna to reach a few other points in a
mid-range distance.
I have connected this Sectorial antenna to one of the RP-SMA connectors
and left the other two without.
On the /etc/config/wireless I'm using the following relevant lines:
option diversity '0'
option rxantenna '0x1'
option txantenna '0x1'
Which supposedly means it will only use that antenna port. Or if I want
to use the use the 3rd antenna port '0x4'.
Is it the correct way of using external antennas on these types of
routers ? Does using it in this way make sure there is no loss of signal
via the other ports ?
Or must the other two ports have some type of antenna even if it's a
different type like the original Omnis ?
Anyone had a similar experience and can help clarifying it ?
Thanks and best regards,
Fernando
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
