El 22/08/14 a las 19:33, Martin Babutzka escibió:
Hello all,
I experienced troubles entering the OpenWRT failsafe mode on a TP-Link
WR841
with Barrier Breaker RC3. I used the failsafe mode on different devices
successfully already. None of the 2 buttons reacted during power on
and no
procedure worked (pushing the button all the time, pushing the button
many times
during startup).
Can anyone confirm this?
Does the failsafe mode depend on a certain package or configuration?
My Barrier
Breaker image was a custom one made with the official image builder.
The package
was built with Barrier Breaker RC3 and the following command:
make image PROFILE=TLWR841 PACKAGES="wpad nano luci-mod-admin-full
luci-ssl
-wpad-mini -dnsmasq -ppp -ppp-mod-pppoe"
Hi Martin. I can't confirm if you need something package or
configuration. But i can say the last week i have something similar whit
wr941nd v3.6 and i can see if i got the failsafe mode using network.
When i use serial connection i see the failsafe mode but i don't have
network.
This was using the latest Attitude Adjustment.
When i reinstall using serial (before failsafe mode) i can't download
using tftp and putting another image of the Barrier Breaker RC3.
Restart the device and now i can ping it in normal mode and failsafe
mode too.
Best regards.
Emiliano.
--
Emiliano Vazquez | PcCentro Informatica & CCTV
Office: +54 (11) 4635-3218 y Rotativas
Movil: 011-15-6253-7165
Mail: [email protected]
Web: http://www.pccentro.com.ar
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
