On Mon, 3 Nov 2014, Weedy wrote: > Send me both images
anyone have any further advice on how to flash my factory d-link dir-810l yet? i did an openwrt build from scratch and ended up with a pile of images, including one ostensibly for the dir-810l: $ ls -F md5sums OpenWrt-ImageBuilder-ramips_mt7620a-for-redhat-x86_64.tar.bz2 openwrt-ramips-mt7620a-Default-rootfs.tar.gz openwrt-ramips-mt7620a-dir-810l-squashfs-sysupgrade.bin openwrt-ramips-mt7620a-Lenovo-y1-squashfs-sysupgrade.bin openwrt-ramips-mt7620a-Lenovo-y1s-squashfs-sysupgrade.bin openwrt-ramips-mt7620a-mt7620a_mt7530-squashfs-sysupgrade.bin openwrt-ramips-mt7620a-mt7620a_mt7610e-squashfs-sysupgrade.bin openwrt-ramips-mt7620a-mt7620a-squashfs-sysupgrade.bin openwrt-ramips-mt7620a-mt7620a_v22sg-squashfs-sysupgrade.bin openwrt-ramips-mt7620a-mzk-750dhp-squashfs-sysupgrade.bin openwrt-ramips-mt7620a-na930-squashfs-sysupgrade.bin openwrt-ramips-mt7620a-root.squashfs openwrt-ramips-mt7620a-rp_n53-squashfs-sysupgrade.bin openwrt-ramips-mt7620a-uImage.bin openwrt-ramips-mt7620a-vmlinux.bin* openwrt-ramips-mt7620a-vmlinux.elf* openwrt-ramips-mt7620a-whr-1166d-squashfs-sysupgrade.bin openwrt-ramips-mt7620a-whr-300hp2-squashfs-sysupgrade.bin openwrt-ramips-mt7620a-whr-600d-squashfs-sysupgrade.bin OpenWrt-SDK-ramips-for-redhat-x86_64-gcc-4.8-linaro_uClibc-0.9.33.2.tar.bz2 OpenWrt-Toolchain-ramips-for-mipsel_24kec+dsp-gcc-4.8-linaro_uClibc-0.9.33.2.tar.bz2 packages/ $ but, as you can see, there are no "factory" type images that i've seen built for other arches, such as my builds for my tp-link ac1750. CLARIFY: i'm assuming that "factory" type images are such that they're the formats to use when flashing over top of original firmware, yes? so the fact that i get no factory type images are why i can't use one of the "sysupgrade" images to reflash my router. i've seen web pages where people have *clearly* reflashed their dir-810l, but i've never seen an explanation of how. i'm also reading this openwrt wiki page: http://wiki.openwrt.org/toh/d-link/dir-810l and i managed to get a serial port working, but when i chose to "load system code", i believe i was asked to specify the location of just a *kernel*, not a full flashable image. so, at this point, i do have a working console port if that helps. i'm at the point where i'm quite willing to pay someone to provide a solution for this. another related post coming shortly... rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ======================================================================== _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
