Hi Mateus,
If you have access to the uboot console (which you need to boot from
network) you could try changing the kernel command line from there to
enable the console on the serial port...
I never tried this but there is some info here:
http://www.stlinux.com/u-boot/kernel-booting , search for bootarchs
Regards,
Sanne
On 2015-01-12 18:19, Mateus Gagliardi wrote:
Hello Emiliano...
The only problem, that o forget to tell is that the console serial was
turned off during the kernel boot....so there is no possibility to
acesso de login via serial port.
Any other tip? Thaks so much!
Mateus Gagliardi | Transdata Smart
Office: +55 (19) 3014-8550
http://www.transdatasmart.com.br
----- Mensagem original -----
De: "Emiliano Vazquez" <[email protected]>
Para: "OpenWrt User List" <[email protected]>
Enviadas: Segunda-feira, 12 de Janeiro de 2015 15:05:40
Assunto: Re: [OpenWrt-Users] Recovery Password withou Failsafe
El 12/01/15 a las 13:49, Mateus Gagliardi escibió:
Hello Everyone!
Anyone knows a way to recovery a password of a product (TPLINK router
MR3020) which has no way to acess the Failsafe Mode? The developer of
this distro has turned to ZERO the minimal-time to get acess to the
FailSafe Mode.
I don't remember but i think if you use the serial port to enter the
device without ask password.
When you are there only execuje
# passwd
and put another password.
I hope this solve your problem.
Best regards.
Emiliano.
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
