Actually my problem was a faulty ethernet cable. Sorry for the noise. 2015-02-10 22:36 GMT-02:00 Thiago Coutinho <[email protected]>:
> I've this router for 2+ years. Today, after a reboot, I can't connect > using the ethernet ports. WiFi was working, but I formatted to factory > defaults and now I don't have access to it. > > My laptop shows that have link, but just at 10MB/s and half-duplex: > > Settings for eth0: > Supported ports: [ TP ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Full > Supported pause frame use: No > Supports auto-negotiation: Yes > Advertised link modes: 10baseT/Half > Advertised pause frame use: No > Advertised auto-negotiation: Yes > Speed: 10Mb/s > Duplex: Half > Port: Twisted Pair > PHYAD: 1 > Transceiver: internal > Auto-negotiation: on > MDI-X: off (auto) > Supports Wake-on: pumbg > Wake-on: g > Current message level: 0x00000007 (7) > drv probe link > Link detected: yes > > When I try to force full-duplex at 100MB/s the connection stays > intermitent: > > Settings for eth0: > Supported ports: [ TP ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Full > Supported pause frame use: No > Supports auto-negotiation: Yes > Advertised link modes: 100baseT/Full > Advertised pause frame use: No > Advertised auto-negotiation: Yes > Speed: Unknown! > Duplex: Unknown! (255) > Port: Twisted Pair > PHYAD: 2 > Transceiver: internal > Auto-negotiation: on > MDI-X: Unknown (auto) > Supports Wake-on: pumbg > Wake-on: g > Current message level: 0x00000007 (7) > drv probe link > Link detected: no > > Any ideas? > > -- > Thiago Coutinho > > "O povo não deveria temer o governo. O governo é quem deveria temer o > povo." > V de Vingança > -- Thiago Coutinho "O povo não deveria temer o governo. O governo é quem deveria temer o povo." V de Vingança
_______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
