Hi,
Yeah, that doesn't seem to work:
$ tc qdisc add dev eth0 root pfifo_fast
RTNETLINK answers: No such file or directory
It looks right, but again it doesn't work the way you would expect.
The reason I want it removed is because something is screwing the shaping on
eth0.2. I always get 7Mb down and 1Mb up no matter what I set the values
(ridiculously high or low). I have tried doing it manually
(http://lartc.org/) and using wshaper. Either that or I have a buggy release
(14.07, r42625). My internet without shaping is 65Mb down and 10Mb up.
I like fq_codel (I run where I can), but it won't make as much difference
unless I get the shaping right because the link to the modem is 100Mb/s (which
being owned by the ISP probably has a massive queue running fifo) and only the
connection after that is 10Mb/s. I want fq_codel (on openwrt) to be in charge
of queue not the modem running fifo.
Regards,
spaceman
On 2015/03/15 00:03:03 , David Lang wrote:
for me, this seems to work
# tc qdisc add dev eth3 root pfifo_fast
# tc qdisc
qdisc pfifo_fast 8002: dev eth3 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0
1 1 1 1 1 1 1 1
I'm curious as to why you are trying to remove fq_codel? have you run
into a place where it hurts you? or are you just trying to compare it
with pfifo_fast?
David Lang
On Thu, 12 Mar 2015, spaceman wrote:
Date: Thu, 12 Mar 2015 22:21:42 +0000
From: spaceman <[email protected]>
Reply-To: OpenWrt User List <[email protected]>
To: [email protected]
Subject: [OpenWrt-Users] Remove fq_codel from eth0
Hi,
I cannot remove the fq_codel qdisc from the eth0 device.
I have tried:
tc qdisc del dev eth0 root
However it responds with:
RTNETLINK answers: No such file or directory
However:
tc -s qdisc show dev eth0
Responds with:
qdisc fq_codel 0: root refcnt 2 limit 1024p flows 1024 quantum 300
target 5.0ms interval 100.0ms ecn
Sent 152870410415 bytes 180254077 pkt (dropped 412, overlimits 0
requeues 195500)
backlog 0b 0p requeues 195500
maxpacket 1514 drop_overlimit 0 new_flow_count 545433 ecn_mark 4
new_flows_len 0 old_flows_len 0
How do get rid of it or replace it with pfifo_fast so it basically
doesn't do anything?
I am using Barrier Breaker.
Regards,
spaceman
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
