Hello,
I compiled HG244d firmware with OpenWRT-14.07, reflashed and started.
However I found that its WAN port didn't work.
While I connected network cable to WAN-port (blue) or
LAN4-port(yellow), even the br-lan also will be broken.
While I un-plug the WAN port, the LAN port can work.
So, What's the right network configuration file for HG255d? who can
share one copy for me?
Here is my configuration file.
root@OpenWRT ~ # cat /etc/config/network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd5f:5fd0:81da::/48'
config interface 'lan'
option ifname 'eth0.1'
option force_link '1'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
option macaddr '00:0c:43:30:52:77'
config interface 'wan'
option ifname 'eth0.2'
option proto 'dhcp'
option macaddr '00:0c:43:30:52:78'
config interface 'wan6'
option ifname '@wan'
option proto 'dhcpv6'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '1 2 3 4 6t'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '0 6t'
--
_ __ _ _
___| |__ ___ _ __ __ _ / _(_)___| |__
|_ / '_ \ / _ \ '_ \ / _` | | |_| / __| '_ \
/ /| | | | __/ | | | (_| | | _| \__ \ | | |
/___|_| |_|\___|_| |_|\__, | |_| |_|___/_| |_|
|___/
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
