>> i did order the hikari service. i had no problem with ipv4. openwrt
>> (12.09, r36088) has a button to do ipv6 pppoe, and i have it selected.
>> but my wan side is not getting an ipv6 address.
>>
>> any clues or debug hints? was gonna tcpdump, but it does not have a -6
>> option :)
>>
>> so i run ppp in debug mode. the line
>> Protocol-Reject for 'IPv6 Control Protocol' (0x8057) received
>> is pretty suspicious :)
>
> and from a friend:
>
> NTT is perhaps the only provider in the world that uses two parallel
> PPP sessions (v4/v6) instead of one dual-stack session to support
> IPv6.
>
> If your router doesn't do that, then you're probably SoL.
>
> can openwrt be convinced to do this?
a year ago, i spent a week on and off hacking on this to no avail. so i
want to
o use another device, an iij seil, between my ntt hikari service modem
and the openwrt
o take the v4 handoff and nat/dhcpd it as now
o take the ipv6 and simply bridge it
any chance?
randy
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
