Did you try eth0 or eth1 instead of egiga1?
From: openwrt-users [mailto:[email protected]] On Behalf Of David Fernandez Sent: Monday, April 04, 2016 6:16 PM To: [email protected] Subject: [OpenWrt-Users] [forum] Configuring the ethernet properly in openwrt u-boot Hi there, I'm a bit new to openwrt, so apologies if this is a too silly question? I've configured images to boot using u-boot, prepared an MMC with thhe uboot kwb image in bin, and got uboot booting, but, it seems that I can't get ethernet propely configured with a static address: U-Boot SPL 2016.03 (Apr 01 2016 - 07:12:17) High speed PHY - Version: 2.0 Detected Device ID 6828 board SerDes lanes topology details: | Lane # | Speed | Type | -------------------------------- | 0 | 3 | SATA0 | | 1 | 0 | SGMII1 | | 2 | 5 | PCIe1 | | 3 | 5 | USB3 HOST1 | | 4 | 5 | PCIe2 | | 5 | 0 | SGMII2 | -------------------------------- PCIe, Idx 1: detected no link PCIe, Idx 2: detected no link High speed PHY - Ended Successfully DDR3 Training Sequence - Ver TIP-1.29.0 DDR3 Training Sequence - Switching XBAR Window to FastPath Window DDR3 Training Sequence - Ended Successfully Trying to boot from MMC U-Boot 2016.03 (Apr 01 2016 - 07:12:17 +0000) SoC: MV88F6828-A0 at 1600 MHz I2C: ready DRAM: 1 GiB (800 MHz, ECC not enabled) MMC: mv_sdh: 0 Model: SolidRun Clearfog A1 Board: SolidRun ClearFog Net: Error: ethernet@30000 address not set. No ethernet found. => printenv baudrate=115200 bootdelay=3 ethact=egiga1 ethprime=egiga1 fdt_high=0x10000000 fdtcontroladdr=3fb58b38 initrd_high=0x10000000 ipaddr=192.168.160.2 serverip=192.168.160.1 stderr=serial@12000 stdin=serial@12000 stdout=serial@12000 Environment size: 259/65532 bytes I suspect that I'm not using the right ethernet device name for ethact or ethprime. I've tried with ethernet@30000, but it says exactly the same. Does anybody know something obvious that could be wrong?
_______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
