On 07/04/16 11:54, David Fernandez wrote:
On Thu, 7 Apr 2016 00:07:00 +0200, Sebastian Kemper
<[email protected]> wrote:
On Wed, Apr 06, 2016 at 05:12:28PM +0100, David Fernandez wrote:
>Hi there,
>
>This might be a silly thing, but, after enabling the following
>(menuconfig, see below), I can't yet see any /dev that resembles
any sd
>card or storage device:
>
>Kernel Modules
>+-Other Modules
>| +-<*> kmod-mvsdio (which enables _*_ kmod-mmc)
>+-Filesystems
> +-<*> kmod-fs-ext4
>
>Is there something else I should enable?
Hi David,
I install the following to mount a USB stick with an ext2 partition:
kmod-usb-storage block-mount kmod-fs-ext4 e2fsprogs
Try if that does it for you.
Bye
Sebastian
Tried that, but no sd-card yet.
Managed to make it work by configuring the kernel separately with make
kernel_menuconfig!
Seems that something is missing in make menuconfig connection to kernel
config... unless somebody can tell which parameters should be enabled
with make menuconfig to get the SD/MMC working in ClearFog A1.
Regards
David F.
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
