On Thu, Oct 19, 2017 at 2:45 PM, Colm O'Neill <[email protected]> wrote: >> Amazing, I am able to scp to the /tmp/ folder, for some probably >> logical reason I wasn't allowed to scp to the / or sshfs the / to my >> laptop. >> I've tried running the sysupgrade with the latest LEDE you pointed me >> to Aaron, but I get a response of `invalid image type` then \n `Image >> check 'platform_check_image' failed` My bet is that the system doesn't think that its a V4. Login via LUCI and look at "Model" on the main landing page at http://192.168.1.1/cgi-bin/luci/ or run "less /etc/board.json" from the command line (without the quotes) and see what it listed under "model" and "id" I got that same error yesterday when I tried to flash a 1043 V3 bin onto a 1043 V2 WAP yesterday (was upgrading remotely and I forgot which model it was).
On Thu, Oct 19, 2017 at 3:31 PM, Nils Kassube <[email protected]> wrote: > You need the *sysupgrade.bin file, not the *factory.bin if you have > already openwrt or lede installed - that would be this one: > <https://downloads.lede-project.org/releases/17.01.4/targets/ar71xx/generic/lede-17.01.4-ar71xx-generic-tl-wr1043nd-v4-squashfs-sysupgrade.bin> On my test V2, sysupgrade takes either without a fuss. Aaron Z A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship, design a building, write a sonnet, balance accounts, build a wall, set a bone, comfort the dying, take orders, give orders, cooperate, act alone, solve equations, analyze a new problem, pitch manure, program a computer, cook a tasty meal, fight efficiently, die gallantly. Specialization is for insects. — Robert Heinlein, Time Enough for Love _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
