----- Le 11 Déc 19, à 22:06, Daniel Berteaud [email protected] a écrit :
> ----- Le 11 Déc 19, à 20:46, mail [email protected] a écrit : >> >> I have no idea whats wrong - the vanilla config runs fine for me on the >> current docker image. Set the log level for "connector" to DEBUG in >> log.conf and check what paths are called - I hope this brings up an idea >> where to look next. >> > > Here's the log with DEBUG for connector : > > https://gist.github.com/dani/2da8c3be2bd79ef937de26780df8e90f Hum, I just wiped my local lib dir (all perl dependencies are installed in a dedicated dir, with cpanm) and started fresh, and this time report_full is working. So it looks like at least one module wasn't installed correctly. I'll try to dig further to find out how it happenned and which dependency was failing Thanks for your help :-) ++ -- [ https://www.firewall-services.com/ ] Daniel Berteaud FIREWALL-SERVICES SAS, La sécurité des réseaux Société de Services en Logiciels Libres Tél : +33.5 56 64 15 32 Matrix: @dani:fws.fr [ https://www.firewall-services.com/ | https://www.firewall-services.com ] _______________________________________________ OpenXPKI-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openxpki-users
