I built the Raspbian package from source. It was pretty straightforward but a couple of packages had dependencies that had to be modified for newer version of perl. Sent from Mail for Windows 10 From: Oliver Welter The config setup looks good so I have no idea what the problem is, you might want to run lintconfig as openxpki user to double check if this can read the files, too. I dont know where you git the Raspian packages from anf how old they are, perhaps they are too old to handle this syntax - to move forward you can just add the names of the reports to the workflow instead of using the reference structure.. Am 04.04.21 um 02:19 schrieb Mitch Mitchell: > Here are the protection attributes: > > /etc/openxpki/config.d/realm# > > drwxr-xr-x 15 openxpki openxpki 4096 Mar 25 02:04 magnoliaca > > ./magnoliaca/report: > > total 8 > > -rw-r--r-- 1 openxpki openxpki 382 Mar 18 22:53 expiry.yaml > > -rw-r--r-- 1 openxpki openxpki 114 Mar 18 22:53 valid.yaml > > Output of lintconfig: > > root@muffin:/etc/openxpki# openxpkiadm lintconfig > > Checking config at /etc/openxpki/config.d/ > > Config ok (99d309eff2ae6ddeb907e9c53ed8c45a44d08caa57a260294dd7eabc324bfc1a) > > openxpki.service file: > > [Unit] > > Description=OpenXPKI Trustcenter Backend > > After=network.target apache2.service > > [Service] > > Type=exec > > PIDFile=/var/run/openxpkid.pid > > ExecStart=/usr/bin/openxpkictl start --nd > > ExecStop=/usr/bin/openxpkictl stop > > # We want systemd to give the daemon some time to finish gracefully, but > still want > > # it to kill httpd after TimeoutStopSec if something went wrong during the > > # graceful stop. Normally, Systemd sends SIGTERM signal right after the > > # ExecStop, which would kill the daemon. We are sending useless SIGCONT > here to give > > # the daemon time to finish. > > Restart=on-failure > > KillSignal=SIGCONT > > PrivateTmp=true > > [Install] > > WantedBy=multi-user.target > > The service runs under the openxpki user: > > openxpki 1229 0.3 10.0 116916 95460 ? S Mar27 35:36 > openxpkid (main) watchdog (idle) > > openxpki 1230 0.0 10.0 117440 95072 ? S Mar27 1:18 > openxpkid (main) server > > openxpki 1265 0.0 10.8 117460 102260 ? Ss Mar27 1:38 > openxpkid (main) server > > openxpki 1269 0.3 10.1 116928 95644 ? S Mar27 35:50 > openxpkid (main) watchdog (idle) > > The OS is Raspian: > > root@muffin:/etc/openxpki/webui# cat /etc/os-release > > PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" > > NAME="Raspbian GNU/Linux" > > VERSION_ID="10" > > VERSION="10 (buster)" > > VERSION_CODENAME=buster > > ID=raspbian > > ID_LIKE=debian > > HOME_URL="http://www.raspbian.org/" > > SUPPORT_URL="http://www.raspbian.org/RaspbianForums" > > BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows 10 > > *From: *Oliver Welter <mailto:m...@oliwel.de> > *Sent: *Friday, April 2, 2021 6:32 AM > *To: *openxpki-users@lists.sourceforge.net > <mailto:openxpki-users@lists.sourceforge.net> > *Subject: *Re: [OpenXPKI-users] FW: Full Certificate Status Report -- > drop down menu not populating > > The directory is merged by the configuration layer on startup, this is > the stuff in OpenXPKI::Config. The Syntax with the @ Symbol is something > we built into the config layer of OpenXPKI, or to be more precise in the > Connector package which is a stand alone package that we use to read the > config tree. It is like a symlink so item@: report points to the node > report in the reals config which is made from the stuff you find in the > report/ folder structure. > > What OS / code packages are you using, how do you start OpenXPKI? In > case you do not start it as root, I suggest you check the permissions > of the report directory and its files - as it shows up when you run > lintconfig as root it might be the problem that you start with a > non-root users that can not read this file. > > Oliver > > Am 02.04.21 um 08:14 schrieb Mitch Mitchell: > > Where in the perl code does it scan that directory. I turned > logging up to debug and still don't see anything unusual. It's > like it looks and finds no files so that's not a failure. > > BTW what does item@: mean - I could only find two uses of that > construct and the yaml standard said @ was reserved for future use. > > Sent from my Verizon, Samsung Galaxy smartphone > > -------- Original message -------- > > From: Oliver Welter <m...@oliwel.de> <mailto:m...@oliwel.de> > > Date: 3/27/21 10:57 AM (GMT-06:00) > > To: Mitch Mitchell <mitchmitchell1...@gmail.com> > <mailto:mitchmitchell1...@gmail.com> > > Subject: Re: [OpenXPKI-users] Full Certificate Status Report -- drop > down menu not populating > > Am 27.03.21 um 03:26 schrieb Mitch Mitchell: > > { > > "options": [], > > "label": "Report Configuration", > > "type": "select", > > "name": "report_config" > > }, > > yes and ths is the problem - there are no options. > > Are you running an old version of OpenXPKI? > > -- > > Protect your environment - close windows and adopt a penguin! > > > > > _______________________________________________ > > OpenXPKI-users mailing list > > OpenXPKI-users@lists.sourceforge.net <mailto:OpenXPKI-users@lists.sourceforge.net> > > https://lists.sourceforge.net/lists/listinfo/openxpki-users <https://lists.sourceforge.net/lists/listinfo/openxpki-users> > > -- > > Protect your environment - close windows and adopt a penguin! > > > > _______________________________________________ > OpenXPKI-users mailing list > OpenXPKI-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/openxpki-users > -- Protect your environment - close windows and adopt a penguin! _______________________________________________ OpenXPKI-users mailing list OpenXPKI-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openxpki-users |
_______________________________________________ OpenXPKI-users mailing list OpenXPKI-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openxpki-users
