Patricia - I just realized that you may be talking about fracture propagation, while my response is describing the modeling of fractures in production. Cheers! - NR
________________________________ From: Neale ROBERTS <[email protected]> Sent: Tuesday, January 7, 2020 12:34 PM To: Alf Birger Rustad <[email protected]>; Patricia Carreras <[email protected]>; [email protected] <[email protected]> Subject: Re: Hydraulic Fracture Modelling Patricia - I don't believe any special calculations should be required to model hydraulic fractures. I would recommend, depending on grid size vs stimulation, using a negative skin in COMPDAT, or perm multipliers in the grid. Good luck! - NR ________________________________ From: Opm <[email protected]> on behalf of Alf Birger Rustad <[email protected]> Sent: Tuesday, January 7, 2020 12:27 AM To: Patricia Carreras <[email protected]>; [email protected] <[email protected]> Subject: Re: [Opm] Hydraulic Fracture Modelling Hi Patricia, I am a bit unsure how you envision the fractured well modelled in Flow. Resinsight already has support for it using well completions: https://resinsight.org/wells-and-completions/ There is to my knowledge no funding available to work on this in Flow at the moment, so the usual "patches are welcome" applies 🙂 Please also note that you will find software in the OPM IFEM repositories to model the fracture propagation in the reservoir. Best, Alf ________________________________ Fra: Opm <[email protected]> på vegne av Patricia Carreras <[email protected]> Sendt: mandag 6. januar 2020 23:01 Til: [email protected] <[email protected]> Emne: [Opm] Hydraulic Fracture Modelling Hello all, I wonder if there are any plans to include the modelling of hydraulic fractures in Flow. This is a key issue given the current important production from unconventionals in the US and other places of the world. Obviously, ResInsight will need to be updated accordingly. Thank you for the hard work. Best regards. PC _______________________________________________ Opm mailing list [email protected] https://opm-project.org/cgi-bin/mailman/listinfo/opm ------------------------------------------------------------------- The information contained in this message may be CONFIDENTIAL and is intended for the addressee only. Any unauthorized use, dissemination of the information or copying of this message is prohibited. If you are not the addressee, please notify the sender immediately by return e-mail and delete this message. Thank you _______________________________________________ Opm mailing list [email protected] https://opm-project.org/cgi-bin/mailman/listinfo/opm _______________________________________________ Opm mailing list [email protected] https://opm-project.org/cgi-bin/mailman/listinfo/opm
