Thank you for your comment. Yes, I already have that step. I had omitted some
steps as they are obvious. Here’s the full set of commands for the
pre-requisites other than the ones installed from source:
sudo yum install -y devtoolset-8
echo 'source /opt/rh/devtoolset-8/enable' >> ~/.bashrc
echo 'export LD_LIBRARY_PATH=${LD_LIBRARY_PATH-}:/usr/lib64:/usr/local/lib' >>
~/.bashrc
echo 'export C_INCLUDE_PATH=${C_INCLUDE_PATH-}:/usr/local/include' >> ~/.bashrc
source ~/.bashrc
sudo yum install -y gmp gmp-devel
sudo yum install -y lapack lapack-devel
sudo yum install -y suitesparse suitesparse-devel
I have all pre-requisites listed on the current version of this page:
https://opm-project.org/?page_id=239
I was able to build OPM Flow from the latest source using these pre-requisites.
Thank you,
Yogi Pandey, Ph.D.
From: Joakim Hove [mailto:[email protected]]
Sent: Thursday, March 12, 2020 4:51 PM
To: Yogi Pandey <[email protected]>; [email protected]
Subject: Re: [Opm] OPM Flow multi-node simulations stuck at domain
decomposition step
Are you certain that you actually pick up the correct compiler - my guess is
that you use the system compiler which is too old.
Try: " source /opt/rh/devtoolset-7/enable" - wipe the build directory and rerun
cmake.
Joakim
tor. 12. mar. 2020, 22:17 skrev Yogi Pandey <HYPERLINK
"mailto:[email protected]"[email protected]>:
Hi Atgeirr,
I've tried building 2019.10 from source. I encountered following error while
building opm-common:
[ 6%] Built target genkw
[ 7%] Updating version information
[ 7%] Built target update-version
[ 7%] Building CXX object
CMakeFiles/opmcommon.dir/src/opm/parser/eclipse/Parser/Parser.cpp.o
/home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:311:37:
error: expected template-name before ‘<’ token
class InputStack : public std::stack< file, std::vector< file > > {
^
/home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:311:37:
error: expected ‘{’ before ‘<’ token
/home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:311:37:
error: expected unqualified-id before ‘<’ token
/home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:320:71:
error: invalid use of incomplete type ‘class Opm::{anonymous}::InputStack’
void InputStack::push( std::string&& input, boost::filesystem::path p ) {
^
/home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:311:7:
note: forward declaration of ‘class Opm::{anonymous}::InputStack’
class InputStack : public std::stack< file, std::vector< file > > {
^~~~~~~~~~
/home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:348:20:
error: field ‘input_stack’ has incomplete type ‘Opm::{anonymous}::InputStack’
InputStack input_stack;
^~~~~~~~~~~
/home/opc/Installers/Opm-Flow-2019.10/opm-common/src/opm/parser/eclipse/Parser/Parser.cpp:311:7:
note: forward declaration of ‘class Opm::{anonymous}::InputStack’
class InputStack : public std::stack< file, std::vector< file > > {
^~~~~~~~~~
make[2]: *** [CMakeFiles/opmcommon.dir/build.make:2728:
CMakeFiles/opmcommon.dir/src/opm/parser/eclipse/Parser/Parser.cpp.o] Error 1
make[1]: *** [CMakeFiles/Makefile2:1962: CMakeFiles/opmcommon.dir/all] Error 2
make: *** [Makefile:141: all] Error 2
Following is the list of pre-requisites I have (not listing all commands here):
-sudo yum install -y devtoolset-8 (for GCC-8.3.1)
-sudo yum install -y gmp gmp-devel
-sudo yum install -y lapack lapack-devel
-sudo yum install -y suitesparse suitesparse-devel
-openmpi-4.0.2 (built from source)
-boost-1.72.0 (built from source)
-cmake-3.16.4 (built from source)
-parmetis-4.0.3 (built from source)
-dune-2.6.0: dune-common, dune-geometry, dune-grid, dune-istl (built from
source)
-Zoltan-3.83 (built from source)
OPM Flow module opm-common is built using following commads:
1) cmake -DCMAKE_BUILD_TYPE=Release -DUSE_MPI=ON -DUSE_OPENMP=ON
-DBLAS_LIBRARIES=/usr/lib64 -DCMAKE_INSTALL_PREFIX=/usr/local ..
2) sudo make
Am I missing any pre-requisite?
Any help will be greatly appreciated.
Thank you,
Yogi Pandey, Ph.D.
-----Original Message-----
From: Yogi Pandey
Sent: Wednesday, March 11, 2020 9:59 AM
To: Atgeirr Rasmussen <HYPERLINK
"mailto:[email protected]"[email protected]>; HYPERLINK
"mailto:[email protected]"[email protected]
Subject: RE: [Opm] OPM Flow multi-node simulations stuck at domain
decomposition step
Thank you for the suggestion Atgeirr. I'll try out the previous release 2019.10.
- Yogi
-----Original Message-----
From: Atgeirr Rasmussen [mailto:HYPERLINK
"mailto:[email protected]"[email protected]]
Sent: Wednesday, March 11, 2020 6:46 AM
To: HYPERLINK "mailto:[email protected]"[email protected]
Subject: Re: [Opm] OPM Flow multi-node simulations stuck at domain
decomposition step
Hi Yogi,
Lots of things have changed in Flow for the initialization in parallel
recently. Could you try to check out the previous release (2019.10) and check
if you see the same problems?
Atgeirr
________________________________
Frå: Opm <HYPERLINK
"mailto:[email protected]"[email protected]> på vegne av
Markus Blatt <HYPERLINK "mailto:[email protected]"[email protected]>
Sendt: onsdag 11. mars 2020 11:08
Til: HYPERLINK "mailto:[email protected]"[email protected] <HYPERLINK
"mailto:[email protected]"[email protected]>
Emne: Re: [Opm] OPM Flow multi-node simulations stuck at domain decomposition
step
Hi Yogi,
On Tue, Mar 10, 2020 at 02:15:19PM -0700, Yogi Pandey wrote:
> Simulation is being run on 4 nodes with 32 processors each using following
> command:
>
> mpirun --display-map -mca btl self -x UCX_TLS=rc,self,sm -x
> HCOLL_ENABLE_MCAST_ALL=0 -mca coll_hcoll_enable 0 -x UCX_IB_TRAFFIC_CLASS=105
> -x UCX_IB_GID_INDEX=3 --cpu-set
> 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35
> -np 144 --hostfile /etc/opt/rdma/hostfile
> /mnt/nfs-share/etc/opm-flow/opm-simulators/build/bin/flow
> --parameter-file=/mnt/nfs-share/data/norne/params
>
Out of curiosity. Is there a special reason why --cpu-set runs until 35 with 32
cpus per node? Might you be oversubscribing a node?
Markus
--
Dr. Markus Blatt
OPM-OP AS
_______________________________________________
Opm mailing list
HYPERLINK "mailto:[email protected]"[email protected]
HYPERLINK
"https://urldefense.com/v3/__https:/eur03.safelinks.protection.outlook.com/?url=https*3A*2F*2Fopm-project.org*2Fcgi-bin*2Fmailman*2Flistinfo*2Fopm&data=02*7C01*7CAtgeirr.Rasmussen*40sintef.no*7C92c439a2c2934fdb4f6308d7c5a44bcd*7Ce1f00f39604145b0b309e0210d8b32af*7C1*7C0*7C637195181746088987&sdata=DP6PfdO7olXefHaRUJk6jRg6*2Bmgthhr4lgZTV*2BJ7zIs*3D&reserved=0__;JSUlJSUlJSUlJSUlJSUlJSUl!!GqivPVa7Brio!P_P6tQnFCIhpsXfRUqrm4JazzL052TnBcVaBQmYyoSsMgC17mQ7H5y4ejOt1VkzszQ$"https://urldefense.com/v3/__https://eur03.safelinks.protection.outlook.com/?url=https*3A*2F*2Fopm-project.org*2Fcgi-bin*2Fmailman*2Flistinfo*2Fopm&data=02*7C01*7CAtgeirr.Rasmussen*40sintef.no*7C92c439a2c2934fdb4f6308d7c5a44bcd*7Ce1f00f39604145b0b309e0210d8b32af*7C1*7C0*7C637195181746088987&sdata=DP6PfdO7olXefHaRUJk6jRg6*2Bmgthhr4lgZTV*2BJ7zIs*3D&reserved=0__;JSUlJSUlJSUlJSUlJSUlJSUl!!GqivPVa7Brio!P_P6tQnFCIhpsXfRUqrm4JazzL052TnBcVaBQmYyoSsMgC17mQ7H5y4ejOt1VkzszQ$
_______________________________________________
Opm mailing list
HYPERLINK "mailto:[email protected]"[email protected]
HYPERLINK
"https://urldefense.com/v3/__https:/opm-project.org/cgi-bin/mailman/listinfo/opm__;!!GqivPVa7Brio!P_P6tQnFCIhpsXfRUqrm4JazzL052TnBcVaBQmYyoSsMgC17mQ7H5y4ejOvYRA19MA$"https://urldefense.com/v3/__https://opm-project.org/cgi-bin/mailman/listinfo/opm__;!!GqivPVa7Brio!P_P6tQnFCIhpsXfRUqrm4JazzL052TnBcVaBQmYyoSsMgC17mQ7H5y4ejOvYRA19MA$
_______________________________________________
Opm mailing list
HYPERLINK "mailto:[email protected]"[email protected]
HYPERLINK
"https://urldefense.com/v3/__https:/opm-project.org/cgi-bin/mailman/listinfo/opm__;!!GqivPVa7Brio!LPMzbr5Ow3NStLVFpW15tbx536Kc7FiPkXxCNUM8osbXOx2MvUysLy3qiVjLah6Yzg$"https://opm-project.org/cgi-bin/mailman/listinfo/opm
_______________________________________________
Opm mailing list
[email protected]
https://opm-project.org/cgi-bin/mailman/listinfo/opm
