Hi Lezin, The short answer is yes, and there are multiple ways of doing it. Unfortunately, Flow does not support setting boundary conditions on inlet nor outlet directly, so you will need to set up wells to mimick inflow and outflow. However, patches are welcome if anybody is up to the task. That said, you will find a ready made application for your task (including history matching the experiment) in the opendect repository. If you choose to set-up the simulation yourself using Flow, you have multiple ways to get hold of the saturation distribution. The simplest may be to open the simulation in Resinsight and extract saturations with an octave script. The most efficient is to use python wrappers to opm-common to extract saturations directly from the restart files.
Good luck! Alf -----Original Message----- From: Opm <[email protected]> On Behalf Of Lezin Galibert Sent: fredag 7. august 2020 12:00 To: [email protected] Subject: [Opm] Rel Perm measurements with FLOW Hello everyone, I would like to use FLOW to simulate an unsteady state rel perm measurements (i.e. low rate injection of brine) as well as a steady state rel perm measurements (i.e. constant fractional flow at each global Sw value). Ideally I would also like to retrieve the Sw distribution after the simulation is over. Is this something possible to do? Thank you! Lezin? ********************************************************************************************************** IMPORTANT NOTICE The information in this e-mail and any files transmitted is the property of PETRICORE and is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please notify the sender immediately and delete the material from any computer. _______________________________________________ Opm mailing list [email protected] https://opm-project.org/cgi-bin/mailman/listinfo/opm ------------------------------------------------------------------- The information contained in this message may be CONFIDENTIAL and is intended for the addressee only. Any unauthorized use, dissemination of the information or copying of this message is prohibited. If you are not the addressee, please notify the sender immediately by return e-mail and delete this message. Thank you _______________________________________________ Opm mailing list [email protected] https://opm-project.org/cgi-bin/mailman/listinfo/opm
