Alun,
There well may be consistencies with the code base and the manual, as
you can see from below.
*Question**
* *Answer**
*
GRIDUNIT: keyword not supported
In file: PP11B_MID_CASE_23W_0000.data, line 86
The manual states that:
The GRIDUNIT keyword defines the units of the grid data. It is usually
output by pre-processing software
when exporting the grid geometry. The data is not used by OPM Flow
intrinsically, but is merely written to
the output EGRID file, as specified by the GRIDFILE keyword, for the use
of post-processing software like
OPM ResInsight.
So you can ignore this.
COORDSYS: keyword not supported
In file: PP11B_MID_CASE_23W_0000.data, line 92
This keyword is marked as unsupported in the 2021-10 (Rev-0) of the
manual, so the message is correct.
MINPORV: keyword not supported
In file: PP11B_MID_CASE_23W_0000.data, line 96
This keyword is marked as unsupported in the 2021-10 (Rev-0) of the
manual, so the message is correct.
Warning: Unhandled summary keyword WBP
In
/home/alun/opm-data-master/sealion/Phase_40/include_2021/BASE_H14_UO4_451_SUM_OPM.INC
line 171
Warning: Unhandled summary keyword WBP9
In
/home/alun/opm-data-master/sealion/Phase_40/include_2021/BASE_H14_UO4_451_SUM_OPM.INC
line 174
The messages are correct and the manual is not.
This vector, as well as the other WBP* vectors were being developed but
the code has not been completed, I have updated the manual accordingly
for the 2022-04 release.
One question, are you using the latest version of the manual, that is
2021-10 (Rev-0)? The manual is updated with each release.
Regarding:
/According to the PRT file, there are no errors but FLOW stops
working with the message "Program threw an exception. Evaluation
function for: GEFF not found"
/
Can you either send me the model or at least the *.DBG and *.PRT files,
and when I have a minute I'll take a look.
OPM User
[email protected]
------------------------------------------------------------------------
On 19-Apr-22 21:09, [email protected] wrote:
[Opm] Problems running ECLIPSE model using FLOW.eml
Subject:
[Opm] Problems running ECLIPSE model using FLOW
From:
Alun Griffiths <[email protected]>
Date:
19-Apr-22, 21:07
To:
"[email protected]" <[email protected]>
Hi
I am trying to run an existing ECLIPSE model using OPM and there seem to be a
few issues:
1. FLOW lists a number of keywords which it says are not supported
but the ones I checked are described in the FLOW manual. For example:
Warning: Unsupported keywords or keyword items:
GRIDUNIT: keyword not supported
In file: PP11B_MID_CASE_23W_0000.data, line 86
COORDSYS: keyword not supported
In file: PP11B_MID_CASE_23W_0000.data, line 92
MINPORV: keyword not supported
In file: PP11B_MID_CASE_23W_0000.data, line 96
2. FLOW lists several unhandled SUMMARY keywords but, again, most of
these are supported. For example:
Warning: Unhandled summary keyword WBP
In
/home/alun/opm-data-master/sealion/Phase_40/include_2021/BASE_H14_UO4_451_SUM_OPM.INC
line 171
Warning: Unhandled summary keyword WBP9
In
/home/alun/opm-data-master/sealion/Phase_40/include_2021/BASE_H14_UO4_451_SUM_OPM.INC
line 174
3. According to the PRT file, there are no errors but FLOW stops working with
the message "Program threw an exception. Evaluation function for: GEFF not
found"
Would appreciate any thoughts you might have
Best regards
Alun Griffiths
[http://rockhopperexploration.co.uk/signatures/images/spacer.png]
[http://rockhopperexploration.co.uk/signatures/images/spacer.png]
[Rockhopper Exploration plc]<http://rockhopperexploration.co.uk>
[http://rockhopperexploration.co.uk/signatures/images/spacer.png]
_______________________________________________
Opm mailing list
[email protected]
https://opm-project.org/cgi-bin/mailman/listinfo/opm
