Hi Harry, That's great news. I would like to check it out to verify that the Copper tests run under Compass, and some help as needed to try out Compass on my hardware. First, I need install guides etc that can help me customize the install for this environment:
- 3 nodes, non-HA (Jumphost, 1 Compute, 1 Control) - Each node has o 1 NIC (I can add a second with a USB NIC adapter) o 16GB RAM o 1TB HDD o 256GB SSD o Support PXE boot (no IPMI) In the meantime I can use your virtual POD for these tests as well, so please let me know (offline as needed) how to access the POD. Thanks, Bryan Sullivan | AT&T From: huangxiangyu [mailto:[email protected]] Sent: Sunday, November 27, 2016 5:54 PM To: huangxiangyu <[email protected]>; SULLIVAN, BRYAN L <[email protected]>; Carlos Goncalves <[email protected]> Cc: [email protected] Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv Hi, Bryan, Carlos Congress support in compass4nfv is finished. It will be a default ansible role in our Mitaka and Newton scenario for ubuntu and for mitaka we also support congress on centos7. Congress will be installed in all three controller nodes with ha by hapoxy. There is a patch about congress support on compass4nfv gerrit and I can deploy a virtual pod with congress if you'd like to check it out. You can contact me if you need further support from compass team. Best regards Harry Huang From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of huangxiangyu Sent: Tuesday, November 01, 2016 12:31 PM To: SULLIVAN, BRYAN L; Carlos Goncalves Cc: [email protected]<mailto:[email protected]> Subject: Re: [opnfv-tech-discuss] congress support in compass4nfv Hi, Bryan The error log is a little too long to post on IRC, so I just send you via email. But IRC is good place to communicate, we can talk about the further detail there. for the deploy environment, I am using ubuntu 16.04.1 on my hosts and this version of ubuntu has official congress debs. Here is what I got using apt list command: congress-common/unknown,now 3.0.0+dfsg1-1 all congress-server/unknown,now 3.0.0+dfsg1-1 all python-congress/now 4.0.0.0rc2~dev80-1 python-congressclient/unknown 1.2.3-2 all after configuration and database operations, I encounter the no module named antlr3 error. I try to fix it by installing antlr_python_runtime but I got error_log_1 when installed runtime V3.0.1 , error_log_2 when installed V3.1.3. Thanks Harry huang From: SULLIVAN, BRYAN L [mailto:[email protected]] Sent: Monday, October 31, 2016 11:39 PM To: huangxiangyu; Carlos Goncalves Cc: Xueyifei (Yifei Xue); [email protected]<mailto:[email protected]> Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv Hi Harry, Can you drop a console log or other details on the process you are using to IRC (#opnfv-copper) or on an etherpad somethere etc? I need to understand where you are getting the Congress code (e.g. "congress debs") and what environment/process you are using to install it. I'm not familiar with antlr and don't know what role it might have in the install. But I can probably figure it out with more info. Thanks, Bryan Sullivan | AT&T From: huangxiangyu [mailto:[email protected]] Sent: Wednesday, October 26, 2016 8:28 PM To: SULLIVAN, BRYAN L <[email protected]<mailto:[email protected]>>; Carlos Goncalves <[email protected]<mailto:[email protected]>> Cc: Xueyifei (Yifei Xue) <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv Hi, I encounter some problem when I start congress-server after I installed congress using congress debs: when I used antlr V3.0.1 runtime returns "ParserRuleReturnScope is not defined" error while other antlr runtime has ANTLR version mismatch problem saying 'The recognizer has been generated by V3.0.1. Please use the V3.0.1 runtime '. So which antlr runtime should I use? Thanks Harry huang From: SULLIVAN, BRYAN L [mailto:[email protected]] Sent: Thursday, October 13, 2016 1:19 AM To: huangxiangyu; Carlos Goncalves Cc: Xueyifei (Yifei Xue); [email protected]<mailto:[email protected]> Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv Email is OK, but you can also edit the Copper wiki at https://wiki.opnfv.org/display/copper/Installer+Support or provide a link to where you are describing the work on your wiki or JIRA. I'll also try to capture the status there as it gets developed. Thanks, Bryan Sullivan | AT&T From: huangxiangyu [mailto:[email protected]] Sent: Tuesday, October 11, 2016 6:45 PM To: Carlos Goncalves <[email protected]<mailto:[email protected]>>; huangxiangyu <[email protected]<mailto:[email protected]>> Cc: Xueyifei (Yifei Xue) <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]>; SULLIVAN, BRYAN L <[email protected]<mailto:[email protected]>> Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv OK, I got all your needs now. I also understand congress is an important component and agree that it should be appear in all scenarios. We are making some adjustment about our ansible now and I will suggest to add congress into the common part. Compass4nfv support offline installation so now I am working on adding congress debs. I will update you our progress on this thread. Best regards Herry Huang From: Carlos Goncalves [mailto:[email protected]] Sent: Sunday, October 09, 2016 5:50 PM To: huangxiangyu Cc: Xueyifei (Yifei Xue); [email protected]<mailto:[email protected]>; SULLIVAN, BRYAN L Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv Hi Henry, Thanks for working on adding Congress support to Compass! >From the Doctor side, we also just need Congress installed as a base service >available in all Compass scenarios. There are no patches needing to be backported if Compass in Danube releases with OpenStack Newton or later. Thanks, Carlos From: SULLIVAN, BRYAN L [mailto:[email protected]] Sent: 09 October 2016 05:24 To: 'huangxiangyu'; Carlos Goncalves Cc: Xueyifei (Yifei Xue); [email protected]<mailto:[email protected]> Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv Hi Herry, Glad to be working with Compass on in this! Congress should be installed as a basic service that is available in all Compass scenarios. This is what we did for Apex and JOID. There's no need for a specific scenario. You can see they types of policy use cases that are in development for Congress at https://wiki.opnfv.org/display/copper/testing. The test cases shown there are integrated into Functest. The Doctor project also depends upon Congress for some of its features. I have an existing Ansible module<https://git.opnfv.org/cgit/copper/tree/components/congress/install/ansible> in the copper repo, that needs to be updated since I moved to a simple bash-script approach<https://git.opnfv.org/cgit/copper/tree/components/congress/install/bash> back in Brahmaputra, and then worked with the JOID and Apex teams on their installer tools (JuJu and Puppet). We can talk about updating that script at some meeting if you want to set it up. We don't have regular meetings in Copper at this time. Thanks, Bryan Sullivan | AT&T From: huangxiangyu [mailto:[email protected]] Sent: Friday, October 07, 2016 9:26 PM To: SULLIVAN, BRYAN L <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Cc: Xueyifei (Yifei Xue) <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Subject: [opnfv-tech-discuss] congress support in compass4nfv 1. Hi, I am from compass4nfv team and see your Jira COMPASS-367<https://jira.opnfv.org/browse/COMPASS-367>. We can integrate congress into compass4nfv using ansible and want to check few things with you : 1. How would you like to use congress? You just use its function or you have things based on it. 2. Do you need a single congress scenario or a scenario with congress and what roles this scenario should have. Best regards Herry Huang
_______________________________________________ opnfv-tech-discuss mailing list [email protected] https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss
