Hi Dimitris, First of all, thanks for your interest in Dovetail. After looking at the failure information, I think the problem is because 192.168.37.205 is not accessible from functest-smoke container. I assume it is the public or admin network, and the link from testing containers to OpenStack via public & admin network plane are required by some testcases. 2018-08-16 10:13:35,982 - functest.core.singlevm - ERROR - cannot connect to 192.168.37.205 And after looking at env_config.sh, I think DOVETAIL_HOME env variable is missing, I remember it is also required to be set in env_config.sh To make the problem shooting easier and faster, I would suggest to running in 'debug' mode, which is add '-d' flag when starting the tests, such as 'dovetail run --testsuite ovp.next -d' Regarding the hosts.yaml, if there are some domains need to be parsed during the testing, they are defined in this file, it will finally be parsed and put into /etc/hosts in the testing container. You can reference the hosts.yaml.sample for the schema. for example if the following information is defined in hosts.yamlhosts_info: 192.168.141.101: - admin_ip - public_ipthen in /etc/hosts of the testing container, the following line will be added. 192.168.141.101 admin_ip public_ip Hope these information will help you~
BRsSerena On Fri, Aug 17, 2018 3:39 PM, dimitris.tsiolakis d...@intracom-telecom.com wrote: Hi Dovetailers, I’m new at the dovetail I’m trying to run dovetail test cases following the latest instruction from testing_guide.rst ( https://gerrit.opnfv.org/gerrit/#/c/60823/). I created all mandatory files: - env_config.sh, ( this is mine looks like http://paste.openstack.org/show/728164/) - tempest_conf.yaml (same as the sample) - pod.yaml( https://paste.ubuntu.com/p/883N3Cmrx4/ I also use password instead of id_rsa) - (I did not create the hosts.yaml since it is optional.) When I run “dovetail run” test fails ( logs can be found here http://paste.openstack.org/show/728169/ ) I seems that the pod.yaml file is not correct and it cannot read the SUT info but I cannot Understand what is wrong. Also the absence of hosts.yaml file is raising a warning what is this file and how should I update it? Can you help me with the configuration and the execution? Thank you in advance Dimitris Tsiolakis SDN NFV Thessaloniki _____________________________________ Intracom Telecom Marinou Antipa 41, Pilea-Thessaloniki,GR 57001 t: +30 2310497389 f: +30 2310497330 d...@intracom-telecom.com www.intracom-telecom.com JOIN US Mobile World Congress Americas 12-14 September Los Angeles, USA Gitex Technology Week 14-18 October Dubai, UAE FutureCom 15-18 October Sao Paulo, Brazil AfricaCom 13-15 November Cape Town, S. Africa Mobile World Congress 25-28 February 2019 Barcelona, Spain Mobile World Congress Shanghai 26-28 June 2019 Shanghai, China The information in this e-mail message and any attachments are intended only for the individual or entity to whom it is addressed and may be confidential. If you have received this transmission in error, and you are not an intended recipient, be aware that any copying, disclosure, distribution or use of this transmission or its contents is prohibited. Intracom Telecom and the sender accept no liability for any loss, disruption or damage to your data or computer system that may occur while using data contained in, or transmitted with, this email. Views or opinions expressed in this message may be those of the author and may not necessarily represent those of Intracom Telecom. -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#21801): https://lists.opnfv.org/g/opnfv-tech-discuss/message/21801 Mute This Topic: https://lists.opnfv.org/mt/24610481/21656 Group Owner: opnfv-tech-discuss+ow...@lists.opnfv.org Unsubscribe: https://lists.opnfv.org/g/opnfv-tech-discuss/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
