Hi Tom,
Some comments for the draft-perrault-behave-natv2-mib-00.txt, I think they are
typos:)
natv2PoolIndex OBJECT-TYPE
SYNTAX Natv2PoolId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of an address pool, unique for a given NAT instance.
It is up to the agent implementation to determine and
operate upon only those values that correspond to
provisioned pools."
::= { natv2PoolEntry 2 }
In this object, I think the SYNTAX should be Natv2PoolIndex. It doesn't define
Natv2PoolId in the draft-perrault-behave-natv2-mib-00.txt.
natv2PortMapExternalPool OBJECT-TYPE
SYNTAX Natv2PoolIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of the address pool in the external realm from which
the mapped external address given in
natv2AddressMapExternalAddress was taken. Zero if the
implementation does not support address pools but has chosen
to support this object, or if no pool was configured for the
given external realm."
::= { natv2AddressMapEntry 11 }
The name of this object should be natv2AddressMapExternalPool.
Cheers
Yu
-----Original Message-----
From: Behave [mailto:[email protected]] On Behalf Of Tom Taylor
Sent: Monday, January 19, 2015 11:57 AM
To: [email protected]; [email protected]; David Harrington; Spencer Dawkins
Subject: [BEHAVE] Fwd: New Version Notification for
draft-perrault-behave-natv2-mib-00.txt
Several months' work, almost done. A couple of sections need work, as indicated
in the document, but there's lots to review including the complete MIB module
definition.
This is a major rewrite from the draft-ietf-behave-nat-11 version of NAT MIB.
Reworking was needed to address all the issues outstanding against that
document. I suppose the next step is to send out a series of messages walking
through all the changes from
draft-ietf-behave-nat-11 and how they respond to the open issues.
I look forward to any comments on the new document.
Tom Taylor
-------- Forwarded Message --------
Subject: New Version Notification for draft-perrault-behave-natv2-mib-00.txt
Date: Sun, 18 Jan 2015 19:45:03 -0800
From: [email protected]
....
A new version of I-D, draft-perrault-behave-natv2-mib-00.txt
has been successfully submitted by Tom Taylor and posted to the IETF repository.
Name: draft-perrault-behave-natv2-mib
Revision: 00
Title: Definitions of Managed Objects for Network Address Translators
(NAT)
Document date: 2015-01-18
Group: Individual Submission
Pages: 80
URL:
http://www.ietf.org/internet-drafts/draft-perrault-behave-natv2-mib-00.txt
Status:
https://datatracker.ietf.org/doc/draft-perrault-behave-natv2-mib/
Htmlized:
http://tools.ietf.org/html/draft-perrault-behave-natv2-mib-00
Abstract:
This memo defines a portion of the Management Information Base (MIB)
for devices implementing the Network Address Translator (NAT)
function. The new MIB module defined in this document, NATV2-MIB, is
intended to replace module NAT-MIB (RFC 4008). NATV2-MIB is not
backwards compatible with NAT-MIB, for reasons given in the text of
this document. A companion document deprecates all objects in NAT-
MIB. NATV2-MIB can be used for monitoring of NAT instances on a
device capable of NAT function. Compliance levels are defined for
three application scenarios: basic NAT, pooled NAT, and carrier-grade
NAT (CGN).
Please note that it may take a couple of minutes from the time of submission
until the htmlized version and diff are available at tools.ietf.org.
The IETF Secretariat
_______________________________________________
Behave mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/behave
_______________________________________________
OPSAWG mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/opsawg
