From: OPSAWG <[email protected]> on behalf of Joe Clarke (jclarke)
<[email protected]>
Sent: 21 May 2020 15:43
2. L3NM
Revision of the three main issues:
Implementation Report by Cisco. It has two main issues
(https://github.com/IETF-OPSAWG-WG/l3nm/issues/110)
- Common module to have all the L3NM specific requirements. Type-like module.
[Anton]: It makes implementation simpler. Does not generate unnecessary
dependencies
[Adrian]: It depends on if we need module for specific types, to avoid
unnecessary imports. Also don't you only need to import types, not the entire
module?
[Qin]: With L3SM we did not take an augmentation approach. If there are common
types defined in both models, then we may need to find the common components.
We should decouple of L3SM.
[Sriram]: Prefer to have a separate type-file for the specific parameters.
[Oscar]: Define a common type-file for the service models.
[Qin]: Is it possible to manage it as an independent draft?
[Oscar in github issues]: After the discussions, it seems reasonable to have a
separate Yang module to contain the types. The suggestion is to write the
module to cover the four service models (client service models, l3sm, l2sm and
Network service models, l2nm, l3nm). It seems reasonable to include this module
in l3nm draft instead of creating a new one to avoid dependencies.
Samier, Dan and Anton to collaborate for a first version of the split
As chair, I want to call this out since it sounds like the authors made a
decision here, and I want to make sure the whole WG has a chance to weigh in.
In reading these minutes and issue #110, I can see the value of a types module
to avoid what may be confusing imports, but I want to know if anyone on the WG
has a different opinion.
<tp>
Joe
The four documents are not spelled out but referred to in shorthand and while I
think I know which are intended, that IMHO needs spelling out.
In principle, a common types is a no-brainer provided it is done early enough -
before anything becomes an RFC! - and with limited enough scope. NETMOD got it
right but did have decades of SMI experience to go on, RTGWG got it right, with
TEAS it is less clear while layer0-types has changed much over its short life -
is it right now? May be.
So carving out the current types (etc) will likely lead to a bad outcome; it is
a question of looking carefully across the range of documents to see what is,
or is likely to be common. The higher up the stack you go the more likely
items are to be common but equally the more likely it is that someone has been
there already.
And if you look at existing types modules, it took a while for the penny to
drop but they end up as separate I-D, better still with a different author to
the importing I-D; a no brainer really.
Tom Petch
Joe
_______________________________________________
OPSAWG mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/opsawg
