Thanks for the reply and the FAQ, Ton.   I¹m pretty certain that no change
was made manually to cause this ­ I am the primary user of opsview and
didn¹t make any changes following the upgrade.

I followed the directions in the FAQ entry, and ADMINACCESS is already
defined for our admin contacts.   Each admin contact looks like the
following:

+-----------------------+--------+----------+----------------+
| contact_name          | roleid | accessid | name           |
+-----------------------+--------+----------+----------------+
| admin                 |     10 |        1 | VIEWALL        |
| admin                 |     10 |        3 | ACTIONALL      |
| admin                 |     10 |        6 | NOTIFYSOME     |
| admin                 |     10 |        7 | CONFIGUREHOSTS |
| admin                 |     10 |        8 | RELOADACCESS   |
| admin                 |     10 |        9 | ADMINACCESS    |


I tried again with the ³admin² contact as well as my own contact (which
previously had admin rights) and still no luck.  I get ³Access Denied² for
anything under /admin.

Anything else I should be looking at?   I am proxying with Apache, if that
makes any difference.

Thanks,
Craig


On 6/24/09 2:08 AM, "Ton Voon" <[email protected]> wrote:

> 
> On 23 Jun 2009, at 22:50, Craig Pendleton wrote:
> 
>> We recently upgraded to Opsview 3.1.0, which was seamless.   Everything
>> worked fine following the upgrade.
>>  
>>  For some reason, I am now unable to access anything under
>> http://server/admin so I am unable to administer the system.   I have 3
>> contacts that are ³admin² and each one is showing the same symptoms.  Any
>> link below /admin gives ³Access Denied².    Links under /cgi-bin, /cgi-nmis,
>> /nagvis and /status appear to be fine.
>>  
>>  Is there a .htaccess that I should be looking at?
> 
> This sounds like someone has removed the ADMINACCESS from the administrator
> role (or whatever role you use for administration, which could be more than
> 1).
> 
> I've added a FAQ entry:
> http://docs.opsview.org/doku.php?id=opsview3:faq#i_get_access_denied_and_i_can
> not_see_any_of_the_admin_pages
> 
> Can you check? Presumably it was someone's action that caused this problem and
> not an upgrade issue?
> 
> Ton
> 
> 
> 
> _______________________________________________
> Opsview-users mailing list
> [email protected]
> http://lists.opsview.org/listinfo/opsview-users


Thanks,
Craig 


----
NOTICE BY HEALTH LANGUAGE, INC.
This message, as well as any attached document, contains information from 
Health Language, Inc. that is confidential.  The information is intended only 
for the use of the addressee named above.  If you are not the intended 
recipient, you are hereby notified that any disclosure, copying, distribution 
or the taking of any action in reliance on the contents of this message or its 
attachments is strictly prohibited, and may be unlawful.  If you have received 
this message in error, please delete all electronic copies of this message and 
its attachments, if any, destroy any hard copies you may have created, without 
disclosing the contents, and notify the sender immediately.  Unless expressly 
stated otherwise, nothing contained in this message should be construed as a 
digital or electronic signature, nor is it intended to reflect an intention to 
make an agreement by electronic means.
_______________________________________________
Opsview-users mailing list
[email protected]
http://lists.opsview.org/listinfo/opsview-users

Reply via email to