Hi Craig, I'm running Multiple: check_opsview_slave_node %SLAVENODE% which reports my slaves being up/down correctly.
Could you try that check and see what happens? Thanks Paul -----Original message----- To: Opsview Users <[email protected]>; From: Craig Pendleton <[email protected]> Sent: Thu 26-05-2011 17:00 Subject: Re: [opsview-users] New slave issue > Thanks for the help Paul. send2slaves -t says its connected to the slave, > and there are no errors in communicating, which is all good of course. > Perhaps everything is fine, but I'm just not sure how to confirm this as my > slave checks are showing critical. > > The fact that my slave checks are critical led me to believe my slave was > not set up properly. On my master server, the "opsview slaves" service > check says " SLAVE CRITICAL - Problem with slaves: opsview-slave" and the > "Slave-node: opsview-slave" service check indicates "SLAVE CRITICAL - Error > returned from retrieval: Status file does not exist" > > Is there any configuration that should be done to have these slave checks go > green (if indeed my slave is working as intended)? Ideally, I'd like some > way for the master to notify if my slave stops functioning properly. > > Thanks in advance! > > Thanks, > Craig > > > > From: Paul <[email protected]> > > Reply-To: Opsview Users <[email protected]> > > Date: Thu, 26 May 2011 10:22:02 +0200 > > To: "[email protected]" <[email protected]> > > Subject: Re: [opsview-users] New slave issue > > > > Hi Craig, > > > > /usr/local/nagios/bin/send2slaves -t > > > > what does that bring for information? > > > > The command you used is to restart the tunnels - I'm running the slaves on a > > different port; this check complains my slaves are bad too - however they > > are > > not :) > > > > Hth > > Paul > > -----Original message----- > > To: Opsview Users <[email protected]>; > > From: Craig Pendleton <[email protected]> > > Sent: Wed 25-05-2011 22:51 > > Subject: Re: [opsview-users] New slave issue > > Attachment: inline.txt > >> Sorry, I hit send a bit too soon. I see these processes running on the > >> slave: > >> > >> nagios 2014 1 0 14:42 ? 00:00:00 /usr/local/nagios/bin/nrpe > >> -c > >> /usr/local/nagios/etc/nrpe.cfg -d > >> nagios 2209 1 0 14:43 ? 00:00:00 > >> /usr/local/nagios/bin/nagios > >> -uxd /usr/local/nagios/etc/nagios.cfg > >> nagios 2213 1 0 14:43 ? 00:00:00 import_slaveresultsd > >> > >> The server appears to be configured properly in opsview as a slave. Any > >> idea > >> what my next troubleshooting steps should be? > >> > >> > >> Thanks, > >> Craig > >> > >> > >> From: Craig Pendleton <[email protected]> > >> Date: Wed, 25 May 2011 14:47:02 -0600 > >> To: Opsview Users <[email protected]> > >> Conversation: New slave issue > >> Subject: New slave issue > >> > >> I¹ve just installed a slave according to the documentation, and it doesn¹t > >> appear the slave is set up properly. > >> > >> [nagios@opsview ~]$ /usr/local/nagios/libexec/check_opsview_slave -r > >> cat: /usr/local/nagios/var/nsca.status: No such file or directory > >> Cannot communicate with slave > >> SLAVE CRITICAL - Problem with slaves: opsview-slave > >> > >> I¹ve verified that I can ssh without password as the nagios user, and > >> nagios > >> processes are running on the slave: > >> > > _______________________________________________ > > Opsview-users mailing list > > [email protected] > > http://lists.opsview.org/lists/listinfo/opsview-users > > _______________________________________________ > Opsview-users mailing list > [email protected] > http://lists.opsview.org/lists/listinfo/opsview-users > _______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
