Sam Bootsma <[EMAIL PROTECTED]> wrote:
Hi List,
We are approaching the cusp of a decision on how to store Oracle data files on our SAN. We don’t have the SAN yet, but it is due to arrive any week (if not any day).
I passed Cary’s “Is RAID 5 Really a Bargain?” paper to our Sys Admin, which he read and succinctly summarized for the Technical Manager here. I have also read through a couple of papers referenced in the BAARF site. The Sys Admin comments were:
Dell would like to know what RAID mode we want configured on the SAN for the B80 and 6C4 computers. Sam has told me that, in the Oracle community, mirroring (RAID1) is preferred over RAID 5 for various reasons (RAID5 is: more costly for write-intensive applications, 3 times more likely to incur data loss, suffers from massive performance degradation during partial outages). RAID1 will be more costly per unit of usable storage. Mirroring seems to be the best choice. Let me know what you think.
Here is the Manager’s response:
Any suggestions on how I can counter points 4 and 5 – and the last point before his “Thanks” line? Currently we have two B80’s (AIX 4.3.3) set up in a HA configuration. They share an external disk array. So if a hardware component in the primary box fails, then it will automatically failover to the secondary box (and at the same time, the secondary box takes control of the external disk array). I think the clustering term in point (4) is referring to this setup.
Thanks for any suggestions.
Sam.
Sent: November 18, 2003 5:08 PM
Subject: RE: SAN configuration for Banner
All the points are valid...however..my thought processes were as follows:
1. The System & Core Application disks are resident on the disks within the CPU and Mirrorred (Everyone OK with that I think)
2. The Databases are Resident on the SAN
3. The SAN disks are RAID 5 as the provide more usable space for the cost as compared to mirrorring
4. As the IBM Systems (B80's & 6C4's) are clusterd thus effectivley Mirrors the RAID 5 Arrays mitigating the issues Sam raises re preformance degradation (which will only ever arise in the event of a failed disk/automated rebuild which is usually configurable to address performance degradation)
5. Write to Disk/Commit to Database should be a background process (although I recognise this is a transaction/write intensive based system)
This is a standard model that all servers are being deployed with and unless there are any specific technical reasons why this will not work it is the way I would like to see the systems implemented. Remeber, with the SAN...Reconfiguration of Disks is not a large issue anymore if required in the future.
Although not an AIX/Oracle guy...I disagree with the statement that RAID5 is 3 times more susceptable to incur Data Loss. RAID 5 is a proven technology
Thanks..... Andrew
-----Original Message-----
From: Carl Nowak
Sent: Tue 18/11/2003 2:56 PM
To: Andrew Riem
Subject: SAN configuration for Banner
Dell would like to know what RAID mode we want configured on the SAN for the B80 and 6C4 computers. Sam has told me that, in the Oracle community, mirroring (RAID1) is preferred over RAID 5 for various reasons (RAID5 is: more costly for write-intensive applications, 3 times more likely to incur data loss, suffers from massive performance degradation during partial outages). RAID1 will be more costly per unit of usable storage. Mirroring seems to be the best choice. Let me know what you think.
Carl
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard