*Please send profiles to [email protected] 248-436-1972*
Dear Partners, We have a hot requirement on* *RF Engineer,* *if you have any Suitable consultants for below requirements Please... Send the resumes/Rate and contact details. I really appreciate for your time and help. *** WE WILL NOT CONSIDER ANY CANDIDATES WITHOUT THE FOLLOWING INFORMATION *** Position they are being submitted for: First Name: Last Name: Phone Number(s): Email Address: Current Location: Availability to Interview: Availability to start: All Inclusive Rate: Birth Month: Birth Day: Birth Year: Soc #: (last 4 digits): We have a huge need for RF engineers experience w/ (3G, 2G, GSM, GPRS, Edge) experience. Title: RF Engineer Duration: 6+ months Pay range: 40-50/hr C2C DOE *Description:* The job will perform moderately difficult tasks that require limited judgment and minimum supervision, but shall confer with technical leads on unusual problems. RF Design Engineer III is responsible for link budget analysis, initial system design and dimensioning for coverage and capacity, site identification and evaluation, spectrum planning and interference analysis. UMTS: RF Design Engineer III is at advanced skill level for UMTS network design together with basic antenna system optimization. The engineer should be able to undertake RF design related performance improvement tasks. Seasoned experience utilizing RF planning and ACP tools is a must. *Level IV Engineer:* A minimum of 8 years work history in RF Design A minimum of 3 years work history dealing with UMTS Aircom (Asset) RF planning tool experience is mandatory Actix (RadioPlan) ACP tool experience is mandatory Prior exposure to Ericsson and Nokia-Siemens UTRAN a strong plus *Level III Engineer:* A minimum of 5 years work history in RF Design A minimum of 2 years work history dealing with UMTS Aircom (Asset) RF planning tool experience is mandatory Actix (RadioPlan) ACP tool experience is highly preferred Prior exposure to Ericsson and Nokia-Siemens UTRAN a strong plus *Level II Engineer:* A minimum of 3 years work history in RF Design A minimum of 1 year work history dealing with UMTS Aircom (Asset) RF planning tool experience is highly preferred Actix (RadioPlan) ACP tool experience is highly preferred Prior exposure to Ericsson and Nokia-Siemens UTRAN a strong plus Must be familiar with GIS software (MapInfo preferred) * Level I Engineer:* A minimum of 1 year work history in RF Design (UMTS familiarity is imperative) Aircom (Asset) RF planning tool experience highly preferred Actix (RadioPlan) ACP tool experience highly preferred Prior exposure to Ericsson and Nokia-Siemens UTRAN a strong plus Must be familiar with GIS software (MapInfo preferred) Good overall computer skills *With Regards,*** *Naresh V* *Technical Recruiter* ReCache, Inc *ROCHESTER HILLS**, MI 48307** * *Ph: **248-436-1972* Fax: 248-565-2054 *[email protected]*** *www.recache.com*** --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "oracleguru" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/oracleguru -~----------~----~----~----~------~----~------~--~---
