Rich --
(moved to devel so that others can share)
Is this a set of instructions for the current version of SIS (i.e., OSCAR
2.2)? Should it be added to our FAQ?
On Mon, 3 Feb 2003, Libby, Richard M wrote:
> RLibby Action item--Quick instructions for adding the e1000 driver:
> ------------------------------
> Insert the floppy marked NIC Driver and mount it with: (distributed with our
> CD, makes a floppy image with drivers on it)
> mount /mnt/floppy
>
> Copy the directory that contains the driver into the /root directory:
> cp -r /mnt/floppy/e1000 /root
>
> There is a tar file in the e1000 directory that we will need to expand.
> Switch to the e1000 directory and expand the tar file with:
> cd /root/e1000
> tar -zxvf e1000-4.2.17.tar.gz
>
> This should create a new directory within the e1000 directory.
> Move to the src directory with:
> cd e1000-4.2.17/src
> To install the driver we first compile it then use insmod to install it.
> The steps are:
> make install
> insmod e1000
>
> Once installed we can give it an address and try pinging to make sure the
> interface is working:
> ifconfig eth0 192.168.1.100
> ping 192.168.1.100
> ------------------------------
> RLibby action item--OSCAR v1.4 instructions
> A specialized instruction set for the Intel SE7500WV2 server board is
> attached too.
--
{+} Jeff Squyres
{+} [EMAIL PROTECTED]
{+} http://www.lam-mpi.org/
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
Oscar-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/oscar-devel
