Jeremy, This can be done by doing multiple listings (groupings) of your machines in the c3.conf file. 1st group should be entire cluster as this is the default selection. other "clusters" could then be your sub-groups. usage is then the same as any other cluster - only it will work on the sub-group (or virtual cluster).
stephen Jeremy Enos wrote: > > Hey- > A command that would be really useful- > > c3_add_group -n <groupname> <member1....n> > c3_del_group -n <groupname> > > I could use this functionality today for grouping GM enabled machines... > that's why it occurred to me. Thoughts? > > Jeremy > > ------------------------------------------------------- > This SF.net email is sponsored by: > The Definitive IT and Networking Event. Be There! > NetWorld+Interop Las Vegas 2003 -- Register today! > http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en > _______________________________________________ > Oscar-devel mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/oscar-devel -- ------------------------------------------------------------------------ Stephen L. Scott, Ph.D. voice: 865-574-3144 Oak Ridge National Laboratory fax: 865-574-0680 P. O. Box 2008, Bldg. 6012, MS-6367 [EMAIL PROTECTED] Oak Ridge, TN 37831-6367 http://www.csm.ornl.gov/~sscott/ ------------------------------------------------------------------------ ------------------------------------------------------- This SF.net email is sponsored by: The Definitive IT and Networking Event. Be There! NetWorld+Interop Las Vegas 2003 -- Register today! http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en _______________________________________________ Oscar-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-devel
