Which distribution are you
running? Also, do you have any firewall software running on your cluster
(eg. pfilter package)?
Cheers,
Beranrd
From: [EMAIL PROTECTED] on behalf of Giles Lesser
Sent: Thu 23/06/2005 6:56 PM
To: [email protected]
Subject: [Oscar-devel] NTP fails to contact headnode
Hi all
I have what appears to be exactly the same problem as Gareth had back in April, I followed that thread, but couldn't find a solution. The ntpd's on the comp nodes fail to contact the headnode, but the ntpd on the headnode works fine
Here are the details: Node 1 first, then headnode.
[EMAIL PROTECTED] root]# /etc/init.d/ntpd start
ntpd: Synchronizing with time server: [FAILED]
Starting ntpd: [ OK ]
[EMAIL PROTECTED] root]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
LOCAL(0) LOCAL(0) 10 l 47 64 1 0.000 0.000 0.008
Headnode 0.0.0.0 16 u - 64 0 0.000 0.000 4000.00
[EMAIL PROTECTED] root]# cat /etc/ntp.conf
# Added by OSCAR package ntpconfig
server oscar_server
restrict oscar_server mask 255.255.255.255
# Prohibit general access to this service.
restrict default ignore
# Permit all access over the loopback interface. This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
# -- CLIENT NETWORK -------
# Permit systems on this network to synchronize with this
# time service. Do not permit those systems to modify the
# configuration of this service. Also, do not use those
# systems as peers for synchronization.
# restrict 192.168.1.0 mask 255.255.255.0 notrust nomodify notrap
# --- OUR TIMESERVERS -----
# or remove the default restrict line
# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
# restrict mytrustedtimeserverip mask 255.255.255.255 nomodify notrap noquery
# server mytrustedtimeserverip
# --- NTP MULTICASTCLIENT ---
#multicastclient # listen on default 224.0.1.1
# restrict 224.0.1.1 mask 255.255.255.255 notrust nomodify notrap
# restrict 192.168.1.0 mask 255.255.255.0 notrust nomodify notrap
# --- GENERAL CONFIGURATION ---
#
# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available. The
# default stratum is usually 3, but in this case we elect to use stratum
# 0. Since the server line does not have the prefer keyword, this driver
# is never used for synchronization, unless no other other
# synchronization source is available. In case the local host is
# controlled by some external source, such as an external oscillator or
# another protocol, the prefer keyword would cause the local host to
# disregard all other synchronization sources, unless the kernel
# modifications are in use and declare an unsynchronized condition.
#
server 127.127.1.0 # local clock
fudge 127.127.1.0 stratum 10
#
# Drift file. Put this in a directory which the daemon can write to.
# No symbolic links allowed, either, since the daemon updates the file
# by creating a temporary in the same directory and then rename()'ing
# it to the file.
#
driftfile /var/lib/ntp/drift
broadcastdelay 0.008
#
# Authentication delay. If you use, or plan to use someday, the
# authentication facility you should make the programs in the auth_stuff
# directory and figure out what this number should be on your machine.
#
# authenticate yes
#
# Keys file. If you want to diddle your server at run time, make a
# keys file (mode 600 for sure) and define the key number to be
# used for making requests.
#
# PLEASE DO NOT USE THE DEFAULT VALUES HERE. Pick your own, or remote
# systems might be able to reset your clock at will. Note also that
# ntpd is started with a -A flag, disabling authentication, that
# will have to be removed as well.
#
keys /etc/ntp/keys
-----------------------------------------------------------------
OK, now the headnode....
[EMAIL PROTECTED] root]# /etc/init.d/ntpd start
ntpd: Synchronizing with time server: [ OK ]
Starting ntpd: [ OK ]
[EMAIL PROTECTED] root]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*mathfox.xs4all. auth2.xs4all.nl 3 u 469 512 377 170.566 1.307 13.197
[EMAIL PROTECTED] root]# cat /etc/ntp.conf
# Added by OSCAR package ntpconfig
# Prohibit general access to this service.
restrict default ignore
restrict 213.84.14.16 mask 255.255.255.255 nomodify notrap noquery
# Permit all access over the loopback interface. This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
# -- CLIENT NETWORK -------
# Permit systems on this network to synchronize with this
# time service. Do not permit those systems to modify the
# configuration of this service. Also, do not use those
# systems as peers for synchronization.
# restrict 192.168.1.0 mask 255.255.255.0 notrust nomodify notrap
# --- OUR TIMESERVERS -----
# or remove the default restrict line
# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
# restrict mytrustedtimeserverip mask 255.255.255.255 nomodify notrap noquery
# server mytrustedtimeserverip
# --- NTP MULTICASTCLIENT ---
#multicastclient # listen on default 224.0.1.1
# restrict 224.0.1.1 mask 255.255.255.255 notrust nomodify notrap
# restrict 192.168.1.0 mask 255.255.255.0 notrust nomodify notrap
# --- GENERAL CONFIGURATION ---
#
# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available. The
# default stratum is usually 3, but in this case we elect to use stratum
# 0. Since the server line does not have the prefer keyword, this driver
# is never used for synchronization, unless no other other
# synchronization source is available. In case the local host is
# controlled by some external source, such as an external oscillator or
# another protocol, the prefer keyword would cause the local host to
# disregard all other synchronization sources, unless the kernel
# modifications are in use and declare an unsynchronized condition.
#
server 213.84.14.16
fudge 127.127.1.0 stratum 10
#
# Drift file. Put this in a directory which the daemon can write to.
# No symbolic links allowed, either, since the daemon updates the file
# by creating a temporary in the same directory and then rename()'ing
# it to the file.
#
driftfile /var/lib/ntp/drift
broadcastdelay 0.008
#
# Authentication delay. If you use, or plan to use someday, the
# authentication facility you should make the programs in the auth_stuff
# directory and figure out what this number should be on your machine.
#
# authenticate yes
#
# Keys file. If you want to diddle your server at run time, make a
# keys file (mode 600 for sure) and define the key number to be
# used for making requests.
#
# PLEASE DO NOT USE THE DEFAULT VALUES HERE. Pick your own, or remote
# systems might be able to reset your clock at will. Note also that
# ntpd is started with a -A flag, disabling authentication, that
# will have to be removed as well.
#
keys /etc/ntp/keys
Many thanks for your help
Giles
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Oscar-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/oscar-devel
I have what appears to be exactly the same problem as Gareth had back in April, I followed that thread, but couldn't find a solution. The ntpd's on the comp nodes fail to contact the headnode, but the ntpd on the headnode works fine
Here are the details: Node 1 first, then headnode.
[EMAIL PROTECTED] root]# /etc/init.d/ntpd start
ntpd: Synchronizing with time server: [FAILED]
Starting ntpd: [ OK ]
[EMAIL PROTECTED] root]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
LOCAL(0) LOCAL(0) 10 l 47 64 1 0.000 0.000 0.008
Headnode 0.0.0.0 16 u - 64 0 0.000 0.000 4000.00
[EMAIL PROTECTED] root]# cat /etc/ntp.conf
# Added by OSCAR package ntpconfig
server oscar_server
restrict oscar_server mask 255.255.255.255
# Prohibit general access to this service.
restrict default ignore
# Permit all access over the loopback interface. This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
# -- CLIENT NETWORK -------
# Permit systems on this network to synchronize with this
# time service. Do not permit those systems to modify the
# configuration of this service. Also, do not use those
# systems as peers for synchronization.
# restrict 192.168.1.0 mask 255.255.255.0 notrust nomodify notrap
# --- OUR TIMESERVERS -----
# or remove the default restrict line
# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
# restrict mytrustedtimeserverip mask 255.255.255.255 nomodify notrap noquery
# server mytrustedtimeserverip
# --- NTP MULTICASTCLIENT ---
#multicastclient # listen on default 224.0.1.1
# restrict 224.0.1.1 mask 255.255.255.255 notrust nomodify notrap
# restrict 192.168.1.0 mask 255.255.255.0 notrust nomodify notrap
# --- GENERAL CONFIGURATION ---
#
# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available. The
# default stratum is usually 3, but in this case we elect to use stratum
# 0. Since the server line does not have the prefer keyword, this driver
# is never used for synchronization, unless no other other
# synchronization source is available. In case the local host is
# controlled by some external source, such as an external oscillator or
# another protocol, the prefer keyword would cause the local host to
# disregard all other synchronization sources, unless the kernel
# modifications are in use and declare an unsynchronized condition.
#
server 127.127.1.0 # local clock
fudge 127.127.1.0 stratum 10
#
# Drift file. Put this in a directory which the daemon can write to.
# No symbolic links allowed, either, since the daemon updates the file
# by creating a temporary in the same directory and then rename()'ing
# it to the file.
#
driftfile /var/lib/ntp/drift
broadcastdelay 0.008
#
# Authentication delay. If you use, or plan to use someday, the
# authentication facility you should make the programs in the auth_stuff
# directory and figure out what this number should be on your machine.
#
# authenticate yes
#
# Keys file. If you want to diddle your server at run time, make a
# keys file (mode 600 for sure) and define the key number to be
# used for making requests.
#
# PLEASE DO NOT USE THE DEFAULT VALUES HERE. Pick your own, or remote
# systems might be able to reset your clock at will. Note also that
# ntpd is started with a -A flag, disabling authentication, that
# will have to be removed as well.
#
keys /etc/ntp/keys
-----------------------------------------------------------------
OK, now the headnode....
[EMAIL PROTECTED] root]# /etc/init.d/ntpd start
ntpd: Synchronizing with time server: [ OK ]
Starting ntpd: [ OK ]
[EMAIL PROTECTED] root]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*mathfox.xs4all. auth2.xs4all.nl 3 u 469 512 377 170.566 1.307 13.197
[EMAIL PROTECTED] root]# cat /etc/ntp.conf
# Added by OSCAR package ntpconfig
# Prohibit general access to this service.
restrict default ignore
restrict 213.84.14.16 mask 255.255.255.255 nomodify notrap noquery
# Permit all access over the loopback interface. This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
# -- CLIENT NETWORK -------
# Permit systems on this network to synchronize with this
# time service. Do not permit those systems to modify the
# configuration of this service. Also, do not use those
# systems as peers for synchronization.
# restrict 192.168.1.0 mask 255.255.255.0 notrust nomodify notrap
# --- OUR TIMESERVERS -----
# or remove the default restrict line
# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
# restrict mytrustedtimeserverip mask 255.255.255.255 nomodify notrap noquery
# server mytrustedtimeserverip
# --- NTP MULTICASTCLIENT ---
#multicastclient # listen on default 224.0.1.1
# restrict 224.0.1.1 mask 255.255.255.255 notrust nomodify notrap
# restrict 192.168.1.0 mask 255.255.255.0 notrust nomodify notrap
# --- GENERAL CONFIGURATION ---
#
# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available. The
# default stratum is usually 3, but in this case we elect to use stratum
# 0. Since the server line does not have the prefer keyword, this driver
# is never used for synchronization, unless no other other
# synchronization source is available. In case the local host is
# controlled by some external source, such as an external oscillator or
# another protocol, the prefer keyword would cause the local host to
# disregard all other synchronization sources, unless the kernel
# modifications are in use and declare an unsynchronized condition.
#
server 213.84.14.16
fudge 127.127.1.0 stratum 10
#
# Drift file. Put this in a directory which the daemon can write to.
# No symbolic links allowed, either, since the daemon updates the file
# by creating a temporary in the same directory and then rename()'ing
# it to the file.
#
driftfile /var/lib/ntp/drift
broadcastdelay 0.008
#
# Authentication delay. If you use, or plan to use someday, the
# authentication facility you should make the programs in the auth_stuff
# directory and figure out what this number should be on your machine.
#
# authenticate yes
#
# Keys file. If you want to diddle your server at run time, make a
# keys file (mode 600 for sure) and define the key number to be
# used for making requests.
#
# PLEASE DO NOT USE THE DEFAULT VALUES HERE. Pick your own, or remote
# systems might be able to reset your clock at will. Note also that
# ntpd is started with a -A flag, disabling authentication, that
# will have to be removed as well.
#
keys /etc/ntp/keys
Many thanks for your help
Giles
