On Mon 2005-10-17 (08:22), Michael Edwards wrote: > Also you might boot off a rescue cd, check if the cards are working, > and then make sure both images are using the same driver. Check in > /etc/modprobe.conf at least.
yep it works, and with the same driver - e1000, from a redhat 9 install which has 2.4 kernel. haven't had a chance to try it with the 2.6 kernel i need it to work with (but the MT cards do work with it) > Have you tried the boot disk option on those nodes? You can mix and > match network booting and using the boot disk if you need to. will have a look at that ta > You could also try one of the 4.2 branch nightly builds. They have a > newer versions of systemimager and some other software so might help. > You would have to start from scratch if you wen't that route though. thx, this's on a production system tho so i can't go that way ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Oscar-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-devel
