When i am Defining the clients...with the fillowing configuration.......
Imagename: oscarimage(already created )
clientdomain: oscardomain
clientname: oscarnode
hosts:1
padding:0
starting no:1
ip: 192.168.1.2 (default value is 10.2.2.1)
mask:255.255.255.0 (default value is 255.0.0.0)
gw: 192.168.1.1 ( i gave the eth1 ip address here.. is it ok?) (default value is 10.2.2.1)
Whem i was clicked on the addclients .....i got the error as
"error running the postclients scripts...check for the logs"
This is the log......
===========================================================================
== Running step 5 of the OSCAR wizard: Define OSCAR clients
=============================================================================
--> Step 5: Running: ./post_clients
No ipchains on this computer
No modification to do for ipchains
Couldn't push hosts file to images at ./post_clients line 41
at /usr/lib/systeminstaller/SystemInstaller/Tk/AddClients.pm line 213
Couldn't run postinstall at /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/Tk.pm line 247
______________________________________________________________________________________________________________
Interface configurations of headnode(VM)
_________________________________________________________________________________________________________________________-
eth0 Link encap:Ethernet HWaddr 52:54:00:12:34:56
inet addr:10.2.2.2 Bcast: 10.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::5054:ff:fe12:3456/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:221 errors:0 dropped:0 overruns:0 frame:0
TX packets:397 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:79824 (77.9 KiB) TX bytes:68507 (66.9 KiB)
Interrupt:11 Base address:0xc100
eth1 Link encap:Ethernet HWaddr 52:54:00:12:34:57
inet addr:192.168.1.1 Bcast: 192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fe12:3457/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:166 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9960 (9.7 KiB) TX bytes:378 (378.0 b)
___________________________________________________________________________________________________
The Hosts configurations......
______________________________________________________________________________________________
[EMAIL PROTECTED] oscar-5.0a1r5037-20060623]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost localhost
10.0.2.15 oscarhost oscar_server nfs_oscar pbs_oscar
192.168.1.1 oscarhost.oscardomain oscarhost
# These entries are managed by SIS, please don't modify them.
192.168.1.2 oscarnode1.oscardomain oscarnode1
_______________________________________________________________________________
The Tap device on the hostOS........
ipaddr: 10.2.2.1 mask: 255.0.0.0
_______________________________________________________-
Should i need to setup the nat in the VM(headnode)......? and
Should i change anything in the /etc/hosts script ?
Imagename: oscarimage(already created )
clientdomain: oscardomain
clientname: oscarnode
hosts:1
padding:0
starting no:1
ip: 192.168.1.2 (default value is 10.2.2.1)
mask:255.255.255.0 (default value is 255.0.0.0)
gw: 192.168.1.1 ( i gave the eth1 ip address here.. is it ok?) (default value is 10.2.2.1)
Whem i was clicked on the addclients .....i got the error as
"error running the postclients scripts...check for the logs"
This is the log......
===========================================================================
== Running step 5 of the OSCAR wizard: Define OSCAR clients
=============================================================================
--> Step 5: Running: ./post_clients
No ipchains on this computer
No modification to do for ipchains
Couldn't push hosts file to images at ./post_clients line 41
at /usr/lib/systeminstaller/SystemInstaller/Tk/AddClients.pm line 213
Couldn't run postinstall at /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/Tk.pm line 247
______________________________________________________________________________________________________________
Interface configurations of headnode(VM)
_________________________________________________________________________________________________________________________-
eth0 Link encap:Ethernet HWaddr 52:54:00:12:34:56
inet addr:10.2.2.2 Bcast: 10.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::5054:ff:fe12:3456/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:221 errors:0 dropped:0 overruns:0 frame:0
TX packets:397 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:79824 (77.9 KiB) TX bytes:68507 (66.9 KiB)
Interrupt:11 Base address:0xc100
eth1 Link encap:Ethernet HWaddr 52:54:00:12:34:57
inet addr:192.168.1.1 Bcast: 192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fe12:3457/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:166 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9960 (9.7 KiB) TX bytes:378 (378.0 b)
___________________________________________________________________________________________________
The Hosts configurations......
______________________________________________________________________________________________
[EMAIL PROTECTED] oscar-5.0a1r5037-20060623]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost localhost
10.0.2.15 oscarhost oscar_server nfs_oscar pbs_oscar
192.168.1.1 oscarhost.oscardomain oscarhost
# These entries are managed by SIS, please don't modify them.
192.168.1.2 oscarnode1.oscardomain oscarnode1
_______________________________________________________________________________
The Tap device on the hostOS........
ipaddr: 10.2.2.1 mask: 255.0.0.0
_______________________________________________________-
Should i need to setup the nat in the VM(headnode)......? and
Should i change anything in the /etc/hosts script ?
------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________ Oscar-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-devel
