Bernard, The header file appears to come from glibc-devel-2.4-4 and this appears to be on the nodes (using "rpm -q glibc-devel"). Using the whatprovides option on the nodes fails... I expected it to but thought I would check.
I realised that newer Oscar release might have fixed something. I was just rather delighted to get as far as I had (it's taken me since downloading that build to get it working). I have been keeping an eye on the fixes being checked in and nothing struck me as fixing a problem I had hit. I will try a newer version in a week or two (or sooner if mpi doesn't work ;-) ). Steve. --- Bernard Li <[EMAIL PROTECTED]> wrote: > Hi Steve: > > First of all, you probably want to use a more recent > snapshot (or at > least backport the fixes) of the branch-5-0 code. > The version you have > has bugs that have already been fixed. > > Regarding your PVM issue, can you please do the > following on the > headnode: > > # rpm -q --whatprovides /usr/include/gnu/stubs-64.h > > And find out if that RPM is installed on the client? > If not, can you > please install that on the nodes and re-run the > tests? > > P.S. Get the latest snapshot from branch, not trunk, > as trunk is now 5.1 > and we are currently working on stabilizing > branch-5-0, which will > become OSCAR 5.0 official release: > > http://oscar.openclustergroup.org/filebrowser/49/branch > > Cheers, > > Bernard > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] > On Behalf > > Of Steven Blackburn > > Sent: Thursday, July 27, 2006 12:05 > > To: [email protected] > > Subject: Re: [Oscar-users] Fc5(x86_64) & Oscar0727 > install > > success,mpich test fail! > > > > snap! I was about to post something about this. I > have > > got r5189 of Oscar running on FC5 x86_64 (the one > as > > released, not my respun one). It too fails the > same > > tests and gets the tcl error. > > > > I tried my best to figure out what was going on... > the > > master and slave programs in the > /home/oscartst/pvm > > directory compile fine on the head node but not on > the > > nodes. The pvmtest.err contains: > > > > In file included from /usr/include/features.h:352, > > from /usr/include/stdio.h:28, > > from master1.c:36: > > /usr/include/gnu/stubs.h:9:27: error: > gnu/stubs-64.h: > > No such file or directory > > In file included from /usr/include/features.h:352, > > from /usr/include/stdio.h:28, > > from slave1.c:33: > > /usr/include/gnu/stubs.h:9:27: error: > gnu/stubs-64.h: > > No such file or directory > > cp: cannot stat `master1': No such file or > directory > > cp: cannot stat `slave1': No such file or > directory > > /var/spool/pbs/mom_priv/jobs/10.orange.s.SC: line > 47: > > ./master1: No such file or directory > > > > > > Indeed the file /usr/include/gnu/stubs-64.h is > > missing. I cpush'd the file to the nodes and could > > compile on the nodes but the test still fails > (with > > the "cannot stat" errors. I don't know how the > tests > > are meant to work or if the missing stubs file is > an > > indication of some other problem. > > > > Steve. > > > > PS: I have attached my install log. > > > > --- joseph pei <[EMAIL PROTECTED]> wrote: > > > > > TORQUE default queue definition > > > [PASSED] > > > TORQUE Shell test > > > [PASSED] > > > Ganglia setup test > > > [PASSED] > > > Ganglia node count test > > > [PASSED] > > > LAM/MPI (via TORQUE) > > > > [FAILED] > > > PVM (via TORQUE) > > > > [FAILED] > > > mpi/openmpi-1.1(64):ERROR:102: Tcl command > execution > > > failed: if { $have_blcr > > > == 1 && $have_gm == 1 && > > > [file exists > > > $dir/openmpi-with-blcr-and-gm-$version] } { > > > module load > $dir/openmpi-with-blcr-and-gm-$version > > > } elseif { $have_blcr == 0 && $have_gm == 1 && > > > [file exists $dir/openmpi-with-gm-$version] > } { > > > module load $dir/openmpi-with-gm-$version > > > } elseif { $have_blcr == 1 && $have_gm == 0 && > > > [file exists > $dir/openmpi-with-blcr-$version] } > > > { > > > module load $dir/openmpi-with-blcr-$version > > > } elseif { [file exists $dir/openmpi-$version] } > { > > > module load $dir/openmpi-$version > > > } else { > > > break > > > } > > > > > > Open MPI (via TORQUE) > > > > [FAILED] > > > MPICH (via TORQUE) > > > > [FAILED] > > > > > > Run APItests... > > > > > > Running Installation tests for pvm > > > [PASS] 2006-07-27 15:57:44 > pvmd-path-ls.apt > > > [PASS] 2006-07-27 15:57:44 > > > envvar-pvm_arch.apt > > > [PASS] 2006-07-27 15:57:44 > > > envvar-pvm_root.apt > > > [PASS] 2006-07-27 15:57:44 envvar.apb > > > [PASS] 2006-07-27 15:57:44 > > > pvmd-path-which.apt > > > [PASS] 2006-07-27 15:57:44 > > > modulecmd-path-ls.apt > > > [PASS] 2006-07-27 15:57:44 > > > pvm-module-list.apt > > > [PASS] 2006-07-27 15:57:44 > > > pvm-module-show-pvm_rsh.apt > > > [PASS] 2006-07-27 15:57:44 > > > pvm-module-show-pvm_arch.apt > > > [PASS] 2006-07-27 15:57:44 > > > pvm-module-show-pvm_root.apt > > > [PASS] 2006-07-27 15:57:44 > > > pvm-module-show.apb > > > [PASS] 2006-07-27 15:57:44 > pvm-module.apb > > > [PASS] 2006-07-27 15:57:44 > install_tests.apb > > > > > > There are 4 failed/skipped tests (see above). > > > > > > _________________________ > > > Should I set the PATH etc., because mpich is > > > installed in > > > /opt/oscar/mpich-ch_p4-gcc-1.2.7, and > > > /opt/oscar/mpich-ch_p4-gcc-1.2.7/bin > > > is not in the PATH? > > > > > > > -------------------------------------------------------------- > > ----------- > > > Take Surveys. Earn Cash. Influence the Future of > IT > > > Join SourceForge.net's Techsay panel and you'll > get > > > the chance to share your > > > opinions on IT & business topics through brief > > > surveys -- and earn cash > > > > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge > > &CID=DEVDEV> > > _______________________________________________ > > > Oscar-users mailing list > > > [email protected] > > > > > > https://lists.sourceforge.net/lists/listinfo/oscar-users > > > > > > > === message truncated === ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Oscar-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-devel
