Hmm... you would definately need to use a boot CD then, since the bonding is set up so late in the boot process.
What happens if you put something like modprobe bonding install bond<N> /sbin/modprobe bonding -o bond<N> miimon=100 mode=0 in a SIS preinstall script (assuming using a redhat UYOK)? You might have to do "./install cluster bond0" when you start oscar too, or hack the SIS master script so it uses that interface on the nodes... On 8/15/07, Adrià Forés Herranz <[EMAIL PROTECTED]> wrote: > > El 15/08/2007, a las 14:58, Michael Edwards escribió: > > > turn off the trunking on the switch until after you image the nodes? > > The problem of that, it's that in every reboot of the nodes, they > will ask what to do by PXE, isn't only at the installation. But it's > an option. > > > > > You might be able to do a pre-install script for SIS which configures > > the channel bonding too... > > Now I'm working in the sata controler on the SIS image with the doc > that you have apported to the main wiki, because the nodes don't have > the same hard as the master. > > It will be interesting configure the channel boning at the SIS image, > and deploy these image by CD. Because with PXE we have also the last > problem. What I have to do for configure the bonding on the SIS image? > > Thanks Michael, > Adrià > > > > > > > > On 8/15/07, Adrià Forés Herranz <[EMAIL PROTECTED]> wrote: > >> Hello! > >> > >> I'm building a HPC with OSCAR with 3 machines. > >> > >> The master have 3 NICS and the nodes have 2 NICS. I'm planning to > >> configure channel bonding on every machine. > >> > >> The channel boning introduces a booting problem, because the switch > >> have the opcion Trunking with the two links on every machine for the > >> channel bonding and don't conect only a single NIC for PXE. > >> > >> There are some solution? or the only one it will be made a CD > >> installation (if it's possible configure the channel bonding on this > >> boot CD). > >> > >> Anyone have a cluster with channel bonding and only 2 NICS on the > >> compute nodes? how it works? > >> > >> Thanks > >> > >> --------------------------------------------------------------------- > >> ---- > >> This SF.net email is sponsored by: Splunk Inc. > >> Still grepping through log files to find problems? Stop. > >> Now Search log events and configuration files using AJAX and a > >> browser. > >> Download your FREE copy of Splunk now >> http://get.splunk.com/ > >> _______________________________________________ > >> Oscar-devel mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/oscar-devel > >> > > > > ---------------------------------------------------------------------- > > --- > > This SF.net email is sponsored by: Splunk Inc. > > Still grepping through log files to find problems? Stop. > > Now Search log events and configuration files using AJAX and a > > browser. > > Download your FREE copy of Splunk now >> http://get.splunk.com/ > > _______________________________________________ > > Oscar-devel mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/oscar-devel > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ > _______________________________________________ > Oscar-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/oscar-devel > ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Oscar-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-devel
