Gilbert-
Looks like when we put that custom kernel into the System Imager image tree, we didn't copy the modules tree in as well.
So here's what I suggest:
copy the modules tree from plieades out to the nodes
update the image trees as well... I think you have a scsi image and an ide image.
The image trees are located in /var/lib/systemimager/images/...
Jeremy
At 04:13 PM 4/3/2002 -0600, Chavez, Gilbert R SITI-ITDSAS wrote:
Jeremy, I had to reboot one of the nodes (node05) in the cluster here at Shell Westhollow Technology Center due to it being in a down state; not pingable, couldn't ssh, etc.. I noticed in the log file after the reboot that rc.sysinit failed on the following steps during the reboot. The system is up and running fine, but the error below is due to the 2.4.16 dir level not being in place. The only dir on this level is /lib/modules/2.4.2-2smp.I noticed Pleiades (head node) had the dir below but none of the cluster nodes has the 2.4.16 dir. Do I need to build this dir for all nodes, and if so, what is the proper procedure to building this dir? Do I just mkdir the dir and copy Pleiades modules.dep file to it? If the dir is not needed where do I go to prevent the system from trying to write to it in the future?Apr 3 15:12:05 node05 depmod: depmod: Can't open /lib/modules/2.4.16/modules.dep for writing Apr 3 15:12:05 node05 rc.sysinit: Finding module dependencies: failed regards, Gilbert
_______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users </x-flowed>
