I'm not familiar with that particular card, does it just look like 4 separate ethernet adapters to the OS? Standard OSCAR won't configure more than 1 adapter. You can modify the systemconfig.conf in the image to configure more adapters when the clients are installed. Just add network stanzas for each of them. See the systemconfigurator man page for details.
Mike On Wed, 2002-08-07 at 07:45, Franz Marini wrote: > Hi, > > I'm gonna reinstall our current beowulf setup (rh 6.2 based, > completely patched in-house) and I'm considering using Oscar 1.3 and RH > 7.3. > > Right now, we have a four ports dlink tulip-based network card, and we're > using 1 port to connect to the external network, 1 port for NFS traffic to > the nodes, 1 port for all other communications with the nodes, and the 4th > one is spare, just in case one of the others should break. > > Now, the question is, is it possible with Oscar to setup things in a > similar way ? Or is it limited to using 1 network port for all > communications with the nodes ? > > Thank you very much for your support, > > > Franz Marini > > > > > --------------------------------------------------------- > Franz Marini > Sys Admin and Software Analyst, > Dept. of Physics, University of Milan, Italy. > email : [EMAIL PROTECTED] > --------------------------------------------------------- > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > Oscar-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/oscar-users ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users
