<x-flowed>
Mark,
Two more possibilities could be that the
hosts are not trusted. Please see
the settings in /etc/gmond.conf of:
# Hosts ASIDE from "127.0.0.1"/localhost and those multicasting
# on the same multicast channel which you will share your XML
# data with. Multiple hosts are allowed on multiple lines.
# default: none
# trusted_hosts 1.1.1.1 1.1.1.2 1.1.1.3 \
# 2.3.2.3 3.4.3.4 5.6.5.6
#
# If you want any host which connects to the gmond XML to receive
# data, then set this value to "on"
# default: off
# all_trusted on
I set all_trusted on one of my systems
and trusted_hosts on another (I like
variety ;-) ).
Regards,
Joe Griffin
MSC.Software
Mark Horner wrote:
Hi,
Ganglia only shows my head node.
I am using oscar 1.4b4 on RH 7.3. I have checked that gmond is running on my nodes
and on the manager - I have tried gmond -ieth1 to no avail.
In a previous posting someone suggested telneting to port 8649 and that a
stream of xml data should be visible - this isn't the case :
telnet bambino1 8649
Trying 192.168.1.2...
Connected to bambino1.phy.uct.ac.za (192.168.1.2).
Escape character is '^]'.
Connection closed by foreign host.
Any suggestions - could it be firewall issue?
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
Oscar-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/oscar-users
</x-flowed>
