Hi Jay. We had exactly the same problem intially with our cluster. We were using DLINK NIC's, and the driver for those cards wasn't supported by the kernel. We solved the problem by compiling the module for the cards into a custom kernel.
So, check what kind of cards you're using and see if the kernel you're pushing over supports them. else, it's kernel-compile time. good luck, ciao On Thu, 17 Oct 2002, Rivera, Jose B (Jay) wrote: > All: > I need help on resolving an issue with Oscar cluster configuration. When I >reboot clients to perform a network boot, they all get network info and filename from >the DHCP server. But when they get to DHCPDISCOVER section, all I see is them sending >packets on "lo" interface only. It times out with "No DHCP Offers." It should also >send packets on "eth0" as per your docs. Does anyone have any ideas? > > Thanks, > Jay > > > ------------------------------------------------------- > This sf.net email is sponsored by: viaVerio will pay you up to > $1,000 for every account that you consolidate with us. > http://ad.doubleclick.net/clk;4749864;7604308;v? > http://www.viaverio.com/consolidator/osdn.cfm > _______________________________________________ > Oscar-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/oscar-users > -- Bruce Becker, PhD student - Department of Physics University of Cape Town Room 405, R.W. James Building, UCT University Avenue North Private Bag RONDEBOSCH 7700 tel (w) +27 21 650 3356 tel (m) +27 82 537 9425 fax +27 21 650 3342 http://hep.phy.uct.ac.za/~becker ------------------------------------------------------- This sf.net email is sponsored by: viaVerio will pay you up to $1,000 for every account that you consolidate with us. http://ad.doubleclick.net/clk;4749864;7604308;v? http://www.viaverio.com/consolidator/osdn.cfm _______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users
