[Oscar-users] Ethernet Card Problem

[Christopher Pawela]

I am trying to set up another cluster using oscar 2.1 on RedHat 7.3 on a Xeon platform
with a Supermicro motherboard. I am using an Intel 1000/F (e1000) fiber gigabit card. The
problem with the card is that has no PXE boot rom so obviously I figured I could just
install oscar through the boot floppy. However, the floppy kernel for the version of SIS
in oscar 2.1 has no driver for the intel e1000 card.

I looked back through the list to see if this issue was discussed before, I did find some problems
with the e1000 but those were with gigabit intel cards that had PXE booting ability so the TFTP kernel
had to be changed.

ANY IDEAS???

Christopher Pawela

Chemistry Department
Center for High Performance Computing
University of Wisconsin




-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
Oscar-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/oscar-users