Re: [Oscar-users] Installing OSCAR 2.2

[Jason B.]

When you are doing the Setup Networking step, you should network boot the nodes in order to collect their MAC address so that you can assign in within the wizard.  Once you have collected and assigned them all, you should click Setup DHCP.  If you are network booting without the aid of the SIS installation disks (also created in this step), you should press Setup Network Boot.  Once this has completed, you should network boot the nodes again so that they can be installed.  Once they are all installed and back to a Login prompt, you should press the Complete Cluster Setup button.  You should not have to enter a password anywhere.

Jason

At 10:30 AM 6/6/2003, Dr. Michaelangelo Salcedo wrote:

I get the setup  network section and begin to set up the nodes.  For each node I am asked to enter a password.  I enter the root password, but it is NOT accepted!  The nodes do not accept the root password and the connected is closed down for each node.  The network is not completed.  Any suggestions?
Also when I create the image for a client, one of the parameters is -ip-assignment.  I choose STATIC-DHCP.  It rejects it and I then manually type in the autoinstallimage command and use DHCP and it accepts it.  If I execute the command manually, is the client image created?
 
I would accepts any help!!!