|
I installed Oscar 3.0 with RedHat 9.0 on my head node. I have an Intel Desktop Board with a D865G chip set with an Intel Ethernet Express 100 nic card for both my head node and my client node. I cannot get the mac address from the client node using an autoinstall floppy. When I PXE boot I get the mac address and assign it to the head node, then stop collecting mac addresses then close the Setup Networking window. The client then gives the following results. I went to Oscar 3.0 from Oscar 2.3.1 because of the same results. If I use an older machine for the client I can use an autoinstall disk and the process goes smoothly. "In need of help". Thank you, Jim C
Listening on LPF/lo/<null> Sending on LPF/lo/<null> Sending on Socket/fallback/fallback-net DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 8 No DHCPOFFERS received. No working leases in the persistent database-sleeping. I couldn't configure the network interface using DHCP. |
