I am installing OSCAR on a few spare boxes to see if OSCAR is right for our cluster. So far things have gone very well, but with one small problem. The net-install over PXE procedure works up until the point where it mounts the hard drive, then it generates errors and goes to the diagnostic shell, due to not directly detecting my 3ware RAID card. So I
#insmod 3w-xxxx #/scripts/<node name here> and the install completes successfully. This is fine for my test set, but rolling this out on the cluster would be a pain if i had to do this command on each machine. Where can I put the insmod command in the OSCAR scripts (systeminstaller scripts?) to have it executed automatically? Or is this something I need to do by chrooting to the client image? Thanks for your time. Andy Goodell ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users
