Hi Frank and thanks for the prompt reply.
> First off, are you sure you are dealing with the right kernel? The > boel kernel is only used for the PXE booting and install, after that a > different kernel is used on the compute nodes themselves. I looked through the archives and found the mail you referred to. I realised that I was referring to the kernel used during booting and install. > The boel kernel, ramdisk and also boel_binaries.tar.gz (which contain > other kernel modules) are in > /usr/share/systemimager/boot/i386/standard/ From here the kernel and > ramdisk are copied to /tftpboot during the OSCAR install process. You > may need to make sure that both of these locations are the same. I followed your reply on 2003-09-25 (very nice step-by-step explanation, thanks very much) and copied the modules into /usr/share/systemimager/boot/i386/standard/boel_binaries.tar.gz. This worked fine after I fixed the partition table (my fault, from before). Thanks very much bruce -- Bruce Becker UCT-CERN Research Center - University of Cape Town Room 405, R.W. James Building, University Avenue North Private Bag RONDEBOSCH 7700 tel :(w) +27 21 650 3356 | (m) +27 82 537 9425 | (f) +27 21 650 3342 WEB :http://hep.phy.uct.ac.za/~becker | AIM : brucellino ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users
