Did you change any of the default settings in the build image window? I assume you're seeing this message when it tries to get an address with DHCP after the kernel loads. Do you see it trying to get an address with any device other than lo? If not, then can you tell me what network card you have in the clients?
Thanks, Jason On Fri, 2004-01-23 at 14:50, Danny Flood wrote: > Jason Brechin, > > OK, I have reached new ground! However, the new problem is Client > Installation. Collecting MACs went fine. But when I try to reboot the > clients, with the SystemImager boot disk, the autoinstall fails. It says I > couldn't configure the network interface using DHCP. I am going to see if I > can find the answer on their website. If you think you know what the > problem is let me know. As well as any other information I would have to > give you in order to solve the problem. > > Thanks again, > > Danny > > > >From: Jason Brechin <[EMAIL PROTECTED]> > >To: Danny Flood <[EMAIL PROTECTED]> > >Subject: Re: [Oscar-users] I'm not sure if you've received my emails > >Date: Fri, 23 Jan 2004 12:19:48 -0600 > > > >It should be fine as long as your network works alright. Any problems > >that may occur shouldn't show up until later, and they will be fixable. > > > >Jason > > > >On Fri, 2004-01-23 at 12:15, Danny Flood wrote: > > > Also, in Network Configuration under Hosts i have 127.0.0.1 > > > localhost.localdomain localhost. Am I supposed to keep this? I also > >have > > > the IP addresses for my two ethernet cards, which are both named > > > mansc107.uwaterloo.ca. The adapter which will be used to communicate > >with > > > the client nodes has aliases: mansc107 oscar_server nfs_oscar pbs_oscar > > > > > > Danny > > > > > > > > > >From: Jason Brechin <[EMAIL PROTECTED]> > > > >To: Danny Flood <[EMAIL PROTECTED]> > > > >CC: [EMAIL PROTECTED] > > > >Subject: Re: [Oscar-users] I'm not sure if you've received my emails > > > >Date: Fri, 23 Jan 2004 11:10:33 -0600 > > > > > > > >I have always installed with the no firewall setting, since pfilter > > > >handles all the firewall rules needed. > > > > > > > >Jason > > > > > > > >On Fri, 2004-01-23 at 09:22, Danny Flood wrote: > > > > > When installing RedHat 8.0 should my security level be high, medium, > >or > > > >no > > > > > firewall? I've been using no firewall, could that be a problem? > > > > > > > > > > > > > > > >From: Jason Brechin <[EMAIL PROTECTED]> > > > > > >To: Danny Flood <[EMAIL PROTECTED]> > > > > > >Subject: Re: [Oscar-users] I'm not sure if you've received my > >emails > > > > > >Date: Thu, 22 Jan 2004 14:52:04 -0600 > > > > > > > > > > > >You don't need any of the SRPMs (with the .src.rpm extension). > >There > > > >is > > > > > >no need to use the doc or source CDs. The error you describe > >suggests > > > > > >that you either didn't copy everything, or that it didn't copy > > > > > >correctly. The workstation install should be sufficient. > > > > > > > > > > > >Jason > > > > > > > > > > > >On Thu, 2004-01-22 at 14:18, Danny Flood wrote: > > > > > > > Well I copied every rpm I could find on all the CDs, including > >the > > > > > > > Documentation, and Source Code CDs. Will this cause problems? > > > >Should I > > > > > > > just copy RedHat/RPMS rpms, and nothing in the SRPMS > >directories? > > > >The > > > > > >files > > > > > > > in the SRPMS still have the extension .rpm. Also, should I not > >use > > > >the > > > > > > > Documentation, and Source Code CDs at all? I ran > >./install_cluster > > > >and > > > > > >I'm > > > > > > > getting a new error I > >hfile:///usr/share/doc/HTML/index.htmlaven't > > > >seen > > > > > >yet: > > > > > > > > > > > > > > error: Failed dependencies: > > > > > > > mysql = 3.23.52 is need by mysql-server-3.23.52-3 > > > > > > > libmysqlclient.so.10 is needed by > >mysql-server-3.23.52-3 > > > > > > > Couldn't run rpm -Uhv /tftpboot/rpm/mysql-3.23.52-3.src.rpm > > > > > > > /tftpboot/rpm/mysql-server-3.23.52-3.i386.rpm > > > > > > > /tftpboot/rpm/oda-1.24-1.noarch.rpm > > > > > >/tftpboot/rpm/perl-CGI-2.81-55.i386.rpm > > > > > > > /tftpboot/rpm/perl-DBD-MySQL-2.1017-3.src.rpm /tftpboot/rpm > > > > > > > ODA is giving up and will not be installed at > > > > > > > /opt/oscar/share/prereqs/oda/scripts/setup line 123 > > > > > > > ERROR: Prerequisite failure! at ./wizard_prep line 60 > > > > > > > Oscar Wizard preparation script failed to complete at > > > >./install_cluster > > > > > >line > > > > > > > 124 > > > > > > > > > > > > > > The only thing i did different was: instead of installing all > >the > > > > > >custom > > > > > > > packages, during the installation of RedHat 8.0, I chose > > > >Workstation > > > > > >(the > > > > > > > documentation says this is sufficient). Also the internet is no > > > >longer > > > > > > > working on the server. I'll try rebooting the machine and > >trying it > > > > > >again. > > > > > > > Let me know what you think. > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > Danny > > > > > > > > > > > > > > > > > > > > > >From: Jason Brechin <[EMAIL PROTECTED]> > > > > > > > >To: Danny Flood <[EMAIL PROTECTED]> > > > > > > > >CC: [EMAIL PROTECTED] > > > > > > > >Subject: Re: [Oscar-users] I'm not sure if you've received my > > > >emails > > > > > > > >Date: Thu, 22 Jan 2004 13:40:51 -0600 > > > > > > > > > > > > > > > >All you need to copy to /tftpboot/rpm are the .rpm packages > >from > > > >the > > > > > > > >CDs. Normally they will be in /mnt/cdrom/RedHat/RPMS. You > >don't > > > > > >really > > > > > > > >need the docs or the source copied. You shouldn't need to > >install > > > >any > > > > > > > >RPMs or SRPMs manually. > > > > > > > > > > > > > > > >Jason > > > > > > > > > > > > > > > >On Thu, 2004-01-22 at 12:26, Danny Flood wrote: > > > > > > > > > I just wanted to double check, I am supposed to copy all of > >the > > > >RPMs > > > > > > > >from > > > > > > > > > all of the RedHat 8.0 CDs. This is including the > >Documentation > > > >and > > > > > > > >Source > > > > > > > > > Code CDs, right? Also, am I supposed to install the RPMs in > >the > > > > > >SRPMS > > > > > > > > > directory as well as in the RedHat/RPMS directory? I also > >found > > > >an > > > > > >RPM > > > > > > > >in > > > > > > > > > base directory on one of the CDs somewhere. I am assuming I > >am > > > > > >supposed > > > > > > > >to > > > > > > > > > copy all of these to /tftpboot/rpm. Let me know if I am > >doing > > > > > >something > > > > > > > > > wrong. Hopefully, I won't need to email you back, but I'll > >let > > > >you > > > > > > > >know, if > > > > > > > > > I run into the problem again. By the way it is OSCAR 3.0. > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > > > > > Danny > > > > > > > > > > > > > > > > > > > > > > > > > > > >From: Jason Brechin <[EMAIL PROTECTED]> > > > > > > > > > >To: Danny Flood <[EMAIL PROTECTED]> > > > > > > > > > >CC: [EMAIL PROTECTED] > > > > > > > > > >Subject: Re: [Oscar-users] I'm not sure if you've received > >my > > > > > >emails > > > > > > > > > >Date: Thu, 22 Jan 2004 09:47:31 -0600 > > > > > > > > > > > > > > > > > > > ><keeping list updated> > > > > > > > > > > > > > > > > > > > >I'm thinking that the problem may not be directly related > >to > > > >OSCAR. > > > > > > I > > > > > > > > > >assume the other wizard steps finished properly? If the > >image > > > > > >build > > > > > > > > > >failed, there may have been a small window that popped up > > > >saying > > > > > >what > > > > > > > > > >happened. Can you paste the contents of the > >oscarinstall.log > > > >from > > > > > >one > > > > > > > > > >of the sessions in which the image build failed? > > > > > > > > > > > > > > > > > > > >Just to verify, are you using OSCAR 3.0 or 2.2.1? > > > > > > > > > > > > > > > > > > > >Thanks, > > > > > > > > > >Jason > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >On Thu, 2004-01-22 at 09:32, Danny Flood wrote: > > > > > > > > > > > I've tried installing OSCAR a few times but have not > >been > > > > > > > >successful. > > > > > > > > > >First > > > > > > > > > > > I tried with RedHat 7.2, realized that wasn't supported, > > > >then > > > > > >tried > > > > > > > > > >Mandrake > > > > > > > > > > > 9.2, now I'm trying RedHat 8.0 and it's still not > >working, > > > > > >although > > > > > > > >this > > > > > > > > > >is > > > > > > > > > > > the furthest I have gotten with the installation. I > >tried > > > > > > > >downloading > > > > > > > > > > > additional packages the first time I ran it on RedHat 8, > >but > > > >i > > > > > > > > > >reinstalled > > > > > > > > > > > the OS and tried again without the additional packages. > > > >Still, > > > > > >the > > > > > > > >same > > > > > > > > > > > problem occurs. GUI, is not responsive until I use > >System > > > > > >Monitor > > > > > > > >to > > > > > > > > > >end > > > > > > > > > > > the process that is running, which is perl. > > > > > > > > > > > > > > > > > > > > > > Thanks again, > > > > > > > > > > > > > > > > > > > > > > Danny > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >From: Jason Brechin <[EMAIL PROTECTED]> > > > > > > > > > > > >To: Danny Flood <[EMAIL PROTECTED]> > > > > > > > > > > > >Subject: Re: [Oscar-users] I'm not sure if you've > >received > > > >my > > > > > > > >emails > > > > > > > > > > > >Date: Thu, 22 Jan 2004 09:21:36 -0600 > > > > > > > > > > > > > > > > > > > > > > > ><keeping the users list updated> > > > > > > > > > > > > > > > > > > > > > > > >It seems like you've run through a complete > >installation > > > > > >already. > > > > > > > >Are > > > > > > > > > > > >you re-installing OSCAR on the machine? That can cause > > > > > >problems. > > > > > > > >If > > > > > > > > > > > >you have file system errors, then that would likely > >cause > > > > > >problems > > > > > > > > > > > >during an image build. Did you download any additional > > > >OSCAR > > > > > > > >packages > > > > > > > > > > > >with OPD? When you click the Build Image button, is > >the > > > >GUI > > > > > >still > > > > > > > > > > > >responsive? Nothing happens in the terminal? > > > > > > > > > > > > > > > > > > > > > > > >Jason > > > > > > > > > > > > > > > > > > > > > > > >On Thu, 2004-01-22 at 07:48, Danny Flood wrote: > > > > > > > > > > > > > Mr. Brechin > > > > > > > > > > > > > > > > > > > > > > > > > > OK, here's what's happening. I run > >./install_cluster > > > >and I > > > > > >get > > > > > > > >to > > > > > > > > > >the > > > > > > > > > > > >OSCAR > > > > > > > > > > > > > Installation Wizard. After I click Build Oscar > >Client > > > > > >Image, > > > > > > > >some > > > > > > > > > > > >output > > > > > > > > > > > > > appears. The last line of the output is: > > > > > > > > > > > > > > > > > > > > > > > > > > -->Returning oscar_clients RPMs for autoupdate: > > > >perl-DB_File > > > > > > > > > > > > > autoupdate-client > > > > > > > > > > > > > > > > > > > > > > > > > > The Create a System Installation Suite Image window > > > >opens. > > > > > >When > > > > > > > >I > > > > > > > > > >click > > > > > > > > > > > > > Build Image from that window, nothing happens. > > > > > > > > > > > > > > > > > > > > > > > > > > When I went to a command line, it told me I have new > > > >mail in > > > > > > > > > > > > > /var/spool/mail/root, so I checked the mail. The > > > >following > > > > > >is > > > > > > > >the > > > > > > > > > > > >message I > > > > > > > > > > > > > received: > > > > > > > > > > > > > > > > > > > > > > > > > > /etc/cron.daily/tripwire-check: > > > > > > > > > > > > > > > > > > > > > > > > > > **** Error: Tripwire database for mansc107 not > > > >found. > > > > > > > >**** > > > > > > > > > > > > > **** Run /etc/tripwire/twinstall.sh and/or > >tripwire > > > > > >--init. > > > > > > > > > > > >**** > > > > > > > > > > > > > > > > > > > > > > > > > > mansc107 is the name of my computer. > > > > > > > > > > > > > Further down it says: > > > > > > > > > > > > > > > > > > > > > > > > > > Connections: > > > > > > > > > > > > > Service sgi_fam: > > > > > > > > > > > > > <no address>: 3 Time(s) > > > > > > > > > > > > > > > > > > > > > > > > > > **Unmatched Entries** > > > > > > > > > > > > > tcpd[8521]: warning: can't get client address: > >Socket > > > > > >operation > > > > > > > >on > > > > > > > > > > > > > non-socket > > > > > > > > > > > > > tcpd[8521]: getpeername: Socket operation on > >non-socket > > > > > > > > > > > > > useradd[2453]: new group: name=oscartst, gid=500 > > > > > > > > > > > > > useradd[2453]: new user: name=oscartst, uid=500, > > > >gid=500, > > > > > > > > > > > > > home=/home/oscartst, shell=/bin/bash > > > > > > > > > > > > > > > > > > > > > > > > > > Later there is an integrity check... > > > > > > > > > > > > > > > > > > > > > > > > > > I get a bunch of warnings saying File system error. > >No > > > >such > > > > > > > >file or > > > > > > > > > > > > > directory > > > > > > > > > > > > > Continuing... > > > > > > > > > > > > > > > > > > > > > > > > > > I can tell you the names of the files, if need be. > > > > > > > > > > > > > There is more information in a Report Summary. I > >can > > > > > >forward > > > > > > > >you > > > > > > > > > >the > > > > > > > > > > > >mail > > > > > > > > > > > > > if you think it will help. I'm not sure if this is > > > >related > > > > > >to > > > > > > > >the > > > > > > > > > > > >original > > > > > > > > > > > > > problem of the "RPM hang," but I thought I'd bring > >it to > > > > > >your > > > > > > > > > >attention. > > > > > > > > > > > > > > > > > > > > > > > > > > Let me know if you need any more information. I'll > >be > > > > > >updating > > > > > > > >the > > > > > > > > > > > >database > > > > > > > > > > > > > and trying to run the script again in the meantime. > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for your help, > > > > > > > > > > > > > > > > > > > > > > > > > > Danny > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >From: Jason Brechin <[EMAIL PROTECTED]> > > > > > > > > > > > > > >To: Danny Flood <[EMAIL PROTECTED]> > > > > > > > > > > > > > >CC: [EMAIL PROTECTED] > > > > > > > > > > > > > >Subject: Re: [Oscar-users] I'm not sure if you've > > > >received > > > > > >my > > > > > > > > > >emails > > > > > > > > > > > > > >Date: Wed, 21 Jan 2004 16:04:14 -0600 > > > > > > > > > > > > > > > > > > > > > > > > > > > >It sounds like you're having the 'rpm hanging' > >problem. > > > > > >Many > > > > > > > >other > > > > > > > > > > > > > >people have experienced this (I'm not one of them). > > It > > > >is > > > > > >due > > > > > > > >to a > > > > > > > > > > > > > >problem with rpm itself, and has been recognized > >(but > > > >still > > > > > >not > > > > > > > > > > > > > >completely fixed I think) by RedHat. > > > > > > > > > > > > > > > > > > > > > > > > > > > >If the tests are failing, I'd need to see the test > > > >results, > > > > > >or > > > > > > > >know > > > > > > > > > > > >what > > > > > > > > > > > > > >tests are failing to be able to help you further. > > > > > >Depending on > > > > > > > > > >which > > > > > > > > > > > > > >tests are failing, there may be other files to look > > > >into to > > > > > > > >find > > > > > > > > > >more > > > > > > > > > > > > > >information on what's going wrong. > > > > > > > > > > > > > > > > > > > > > > > > > > > >I don't know what tripwire is looking for, so I > >can't > > > >say > > > > > >what > > > > > > > > > >might be > > > > > > > > > > > > > >missing. I'm assuming you're talking about running > >it > > > >on > > > > > >the > > > > > > > > > >clients? > > > > > > > > > > > > > > > > > > > > > > > > > > > >Jason > > > > > > > > > > > > > > > > > > > > > > > > > > > >On Wed, 2004-01-21 at 15:46, Danny Flood wrote: > > > > > > > > > > > > > > > Dear Mr. Brechin, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I installed RedHat 8.0, and I am still having > > > >trouble > > > > > > > >installing > > > > > > > > > > > >OSCAR. > > > > > > > > > > > > > > > However, I'm having trouble further down the > >road. > > > >When > > > > > >I > > > > > > > >am > > > > > > > > > >trying > > > > > > > > > > > >to > > > > > > > > > > > > > > > Build an OSCAR image. After I click Build image > > > >nothing > > > > > > > > > >happens. I > > > > > > > > > > > > > >tried > > > > > > > > > > > > > > > running the ps command, but there doesn't seem > >to be > > > >any > > > > > >rpm > > > > > > > > > > > >processes. > > > > > > > > > > > > > >I > > > > > > > > > > > > > > > tried rebuilding the database anyways, but that > > > >still > > > > > > > >doesn't > > > > > > > > > >work. > > > > > > > > > > > >I'm > > > > > > > > > > > > > > > going to try doing it a few more times tomorrow > > > >morning. > > > > > > > >Any > > > > > > > > > >ideas > > > > > > > > > > > > > >would be > > > > > > > > > > > > > > > fantastic. A couple other things I've noticed: > >the > > > > > > > > > > > > > >testing/test_cluster > > > > > > > > > > > > > > > script it fails, when it try to communicate to > >the > > > > > >client > > > > > > > >nodes; > > > > > > > > > > > >also > > > > > > > > > > > > > >when I > > > > > > > > > > > > > > > run tripwire --init, I get errors saying that > >some > > > > > > > > > >files/directories > > > > > > > > > > > >are > > > > > > > > > > > > > > > missing. I can give you more details tomorrow. > > > >Again, > > > > > >if > > > > > > > >you > > > > > > > > > >can > > > > > > > > > > > >help > > > > > > > > > > > > > >me > > > > > > > > > > > > > > > out in anyway that would be great. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for your time, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Danny Flood > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >From: Jason Brechin <[EMAIL PROTECTED]> > > > > > > > > > > > > > > > >To: [EMAIL PROTECTED] > > > > > > > > > > > > > > > >CC: [EMAIL PROTECTED] > > > > > > > > > > > > > > > >Subject: Re: [Oscar-users] I'm not sure if > >you've > > > > > >received > > > > > > > >my > > > > > > > > > > > >emails > > > > > > > > > > > > > > > >Date: Wed, 21 Jan 2004 11:15:05 -0600 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >No official version of OSCAR supports MDK 9.2. > > > >OSCAR > > > > > >3.0 > > > > > > > >does > > > > > > > > > > > >support > > > > > > > > > > > > > > > >RedHat 8.0 and 9, and Mandrake 9.0. Sherbrooke > > > > > >University > > > > > > > >did > > > > > > > > > > > > > > > >distribute a CD with a version of Mandrake 9.2 > >and > > > >a > > > > > > > >version of > > > > > > > > > > > >OSCAR > > > > > > > > > > > > > > > >that supported it, but I don't know if that is > > > >still > > > > > > > >available > > > > > > > > > > > > > >anywhere. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >Jason > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >On Thu, 2004-01-15 at 10:35, > > > > > >[EMAIL PROTECTED] > > > > > > > >wrote: > > > > > > > > > > > > > > > > > Sorry for the abundance of emails. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I hope this is going to the right place. I > >sent > > > >one > > > > > > > >earlier, > > > > > > > > > >but > > > > > > > > > > > >I > > > > > > > > > > > > > >think > > > > > > > > > > > > > > > >it may > > > > > > > > > > > > > > > > > have bounced back. I registered on your > > > >website, > > > > > >but I > > > > > > > >used > > > > > > > > > >the > > > > > > > > > > > > > >email > > > > > > > > > > > > > > > > > [EMAIL PROTECTED] The correct email > >should > > > >be > > > > > > > > > > > > > > > >[EMAIL PROTECTED] > > > > > > > > > > > > > > > > > I'll try registering again, if it's a small > > > > > >technical > > > > > > > > > >problem > > > > > > > > > > > >such > > > > > > > > > > > > > >as > > > > > > > > > > > > > > > >that. My > > > > > > > > > > > > > > > > > main concern is the trouble I'm having > > > >installing > > > > > >OSCAR > > > > > > > >on > > > > > > > > > >my > > > > > > > > > > > > > >Mandrake > > > > > > > > > > > > > > > >9.2 > > > > > > > > > > > > > > > > > operating system. Please give me an email > >back, > > > >if > > > > > >just > > > > > > > >to > > > > > > > > > > > > > >acknowledge > > > > > > > > > > > > > > > >that you > > > > > > > > > > > > > > > > > received this email. I can give you more > > > >details, > > > > > >once > > > > > > > > > >we've > > > > > > > > > > > > > > > >established a > > > > > > > > > > > > > > > > > steady stream of communication. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks again, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > dflood > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------- > > > > > > > > > > > > > > > > > This mail sent through www.mywaterloo.ca > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >------------------------------------------------------- > > > > > > > > > > > > > > > > > The SF.Net email is sponsored by EclipseCon > >2004 > > > > > > > > > > > > > > > > > Premiere Conference on Open Tools > >Development > > > >and > > > > > > > > > >Integration > > > > > > > > > > > > > > > > > See the breadth of Eclipse activity. > >February > > > >3-5 in > > > > > > > > > >Anaheim, > > > > > > > > > > > >CA. > > > > > > > > > > > > > > > > > http://www.eclipsecon.org/osdn > > > > > > > > > > > > > > > > > > >_______________________________________________ > > > > > > > > > > > > > > > > > Oscar-users mailing list > > > > > > > > > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > >https://lists.sourceforge.net/lists/listinfo/oscar-users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >_________________________________________________________________ > > > > > > > > > > > > > > > The new MSN 8: smart spam protection and 2 > >months > > > >FREE* > > > > > > > > > > > > > > > http://join.msn.com/?page=features/junkmail > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >_________________________________________________________________ > > > > > > > > > > > > > Protect your PC - get McAfee.com VirusScan Online > > > > > > > > > > > > > > > > >http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >_________________________________________________________________ > > > > > > > > > > > Protect your PC - get McAfee.com VirusScan Online > > > > > > > > > > > > >http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >_________________________________________________________________ > > > > > > > > > Help STOP SPAM with the new MSN 8 and get 2 months FREE* > > > > > > > > > > > > > > > > > > > > > > > > > > > > >http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca > > > > > > > > > > > > > > > > > > > > > > > >_________________________________________________________________ > > > > > > > The new MSN 8: smart spam protection and 2 months FREE* > > > > > > > http://join.msn.com/?page=features/junkmail > > > > > > > > > > > > > > > > > > >http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca > > > > > > > > > > > > > > > > _________________________________________________________________ > > > > > Protect your PC - get McAfee.com VirusScan Online > > > > > http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > > > > > > > > > _________________________________________________________________ > > > MSN 8 with e-mail virus protection service: 2 months FREE* > > > > >http://join.msn.com/?page=features/virus&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca > > > > _________________________________________________________________ > STOP MORE SPAM with the new MSN 8 and get 2 months FREE* > http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users
