Re: [Oscar-users] Problems with a routing queue in OSCAR 3.0

[Jeremy Enos]

No... that shouldn't cause any problem.  But it may get removed when you re-run the post_install step.  I see that your additional nodes are not showing up there... when you added the nodes through the OSCAR interface, are you sure you ran the final step?  That's where the changes get implemented in the different software packages (c3, pbs, etc).

        Jeremy

At 03:23 AM 3/30/2004, Carlos Vasco Ortiz wrote:

Jeremy,

Sorry for the 'under-information' I gave you. Since this is a small cluster, I changed a bit the Oscar configuration and added the head node
as a computing node to the pbs nodes file, to increase the computing capacitiy of the cluster. The nodes file was changed to:

ce101.cetsia np=2 nodo all
ce102.cetsia np=2 nodo all
ce103.cetsia np=2 nodo all
ce104.cetsia np=2 nodo all
ce105.cetsia np=2 nodo all
tecws004     np=2 all

If not using any property, all the machines can be selected by pbs. If I use the property 'nodo', only the nodes are selected. Generally we
don't use any property.

So we have the five nodes ce101-ce105, and the head node tecws004.

Can be this configuration the problem?

Thanks again,
Carlos
 

-- 
Carlos Vasco Ortiz (ITP Tecnolog�a y M�todos)
Tel: 34 91 207 91 21   [ITP-only internal ext.: 91 21]
Fax: 34 91 207 94 11
mailto:[EMAIL PROTECTED]