RE: [Oscar-users] Client won't finish installing image

[Lombard, David N]

Yes, you can simply add the missing/changed lines...   -- David N. Lombard   My comments represent my opinions, not those of Intel Corporation. From: Johnston Michael J Contr AFRL/DES [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 02, 2005 3:24 PM To: Bernard Li; Lombard, David N; Johnston Michael J Contr AFRL/DES; oscar-users@lists.sourceforge.net Subject: RE: [Oscar-users] Client won't finish installing image   Thank you for pointing this out!  I should have known to look at that first, but since it said “boot” and not “network” I didn’t put it together.  I’ve booted off of the rescue CD and gotten the modprobe.conf file.  Since this is a blade system and I have no CD or floppy it’s going to be quite a pain getting that small file.  Would it still work if I just retyped it into a new file?  There is only one line in it.  “alias eth0 e1000”  Sure would save me a lot of work. J   Thanks for your help again!   Mike   From: Bernard Li [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 02, 2005 2:50 PM To: Lombard, David N; Johnston Michael J Contr AFRL/DES; oscar-users@lists.sourceforge.net Subject: RE: [Oscar-users] Client won't finish installing image   Mike:   Sounds like you've hit the problem with /etc/modprobe.conf on FC2.   Read the Release Notes for FC2 in the docs, there's a resolution involving getting a 'correct' /etc/modprobe.conf from Rescue CD and copying that to your image.   Cheers,   Bernard   From: Lombard, David N [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 02, 2005 13:47 To: Johnston Michael J Contr AFRL/DES Cc: Bernard Li Subject: RE: [Oscar-users] Client won't finish installing image I assume you’re running the ifconfig on a client node via the console...                            What does lsmod show?   What is in the following files?   /etc/modules.conf   /etc/sysconfig/network   /etc/sysconfig/network-scripts/ifcfg-eth0   -- David N. Lombard                                                              My comments represent my opinions, not those of Intel Corporation. From: Johnston Michael J Contr AFRL/DES [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 02, 2005 1:33 PM To: Lombard, David N Subject: RE: [Oscar-users] Client won't finish installing image   Gahhh… I’m having another problem.  I hope it’s simple.  All my nodes just finished rebuilding but the network doesn’t work on any of them.  When I try and ping something it says “Network is unreachable.”  I can’t even ping the nodes from the head node.  It just times out each ping.  I can’t think of what might have happened.  I didn’t use multicasting or anything.  Any idea where I should look?  Sorry to keep being a pain with these newb questions.   Also, when I do an ipconfig it just comes up with the 127.0.0.1 and not eth0.  Could it be a driver issue?