RE: [Oscar-users] OSCAR and SATA support

Mon, 02 May 2005 10:55:17 -0700

Title: Re: [Oscar-users] Oscar 4.1 / Redhat 9.0

Bernard,

 

I am using;

 

Intel SE7320VP2 Motherboard

Intel E7320 Chipset

Dual-channel SATA 150 (two connectors) integrated with RAID 0/1 support

 

I have been using the kernel module you suggested in a previous email which seems to recognize the SATA drive fine as sda. However,

I think the problem is with the program “parted” which is included with the systemimager included with oscar 4.1.

 

Thank you,

 

Chris Pawela

 

 

-----Original Message-----
From: Bernard Li [mailto:[EMAIL PROTECTED]
Sent: Monday, May 02, 2005 2:54 AM
To: YoungJun Kim; [EMAIL PROTECTED]; [email protected]
Subject: RE: [Oscar-users] OSCAR and SATA support

 

Hey guys:

 

I have made some progress using the kernel available here:

 

 

What I am going to ask both of you is to provide me with the following information:

 

1) Motherboard model name

2) SATA controller card/adapter name (eg. Silicon Image SI3114)

3) Kernel module associated with controller (eg. sata_sil)

 

I was able to image a node using the above kernel.  However the problem is that the kernel recognizes my HD as hda but FC3 recognizes it as sda.

 

Thanks,

 

Bernard

 

From: [EMAIL PROTECTED] on behalf of YoungJun Kim
Sent: Mon 25/04/2005 10:48 PM
To: [EMAIL PROTECTED]; [email protected]
Subject: Re: [Oscar-users] Oscar 4.1 / Redhat 9.0

I tried to install Oscar into SATA disks but unfortunately the version of
SystemImager Oscar uses did not support SATA disks.

Thank you,
YoungJun
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, April 25, 2005 10:42 PM
Subject: [Oscar-users] Oscar 4.1 / Redhat 9.0


>I am trying to install Oscar 4.1 on a 16 node cluster using the Intel
> SE7320VP2 motherboard with SATA disks. I can get oscar working to the
> point of node installation. The systemimager kernel located in the
> /tftpboot directory has no problem finding the e1000 ethernet card for
> dhcp boot. The problem starts with the second kernel install from the
> systemimager.
>
> I get this message:
> NO DISK DEVICE FILES WHERE FOUND
>
> I tracked the problem to this file
>
> /usr/share/systemimager/boot/i386/standard/boel_binaries.tar.gz
>
> I'm assuming the ide-disk.o file in this archive doesn't have the proper
> build for SATA disks. Is there anyway around this problem?
>
> Thank you,
>
> Chris Pawela
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Oscar-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/oscar-users
>



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Oscar-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/oscar-users

Reply via email to