Can you give us the output of "ifconfig" on your
headnode? Please remember to hide any sensitive IP information if
necessary. I just need to find out what your network setup is like (e.g.
how many network cards you have, ip, etc.)
Cheers,
Bernard
From: Michelle Chu [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 22, 2006 11:33
To: Michael Edwards
Cc: Bernard Li; [email protected]
Subject: Re: [Oscar-users] client installations problemHey, Michael,I tried the boot CD option, and the client nodes starts to install from the system image file, however, I am seeing another problem:*******************************************************************bla bla...we have connectivity to your systemImager serverstart_syslogdget_boel_binaries_tarballrsync -av 10.1.1.1: boot/../boel_binaries.tar.gzrsync: failed to connect to 10.1.1.1 ( note: it is my server node)connection refused. (111)rsync: error: error in scket IO(code10) at client serverkilling off running processes.*************************************************************************How may i set in the server node in order to allow all traffic from client nodes in the private network?Thanks,Michelle
On 3/21/06, Michael Edwards <[EMAIL PROTECTED]> wrote:Have you tried either the boot CD option or etherboot? Occasionally I
have had problems with TFTP not working on its own, but it works ok
off the boot CD. Etherboot can go on a floppy if CDs aren't an
option, or that doesn't work either.
On 3/20/06, Bernard Li <[EMAIL PROTECTED]> wrote:
>
>
> Hi Michelle:
>
> Everything looks fine except for the following:
>
> Tk::Error: Failed to AUTOLOAD 'Tk::Label::selectionRange' at
> /usr/lib/systeminstaller/SystemInstaller/Tk/AddClients.pm
> line 193
> Carp::croak at /usr/lib/perl5/5.8.5/Carp.pm line 201
> Tk::Widget::__ANON__ at
> /usr/lib64/perl5/vendor_perl/5.8.0/x86_64-linux-thread-multi/Tk/Widget.pm
> line 347
> SystemInstaller::Tk::AddClients::run_addclients at
> /usr/lib/systeminstaller/SystemInstaller/Tk/AddClients.pm
> line 193
> Tk callback for .toplevel.button10
> Tk::__ANON__ at
> /usr/lib64/perl5/vendor_perl/5.8.0/x86_64-linux-thread-multi/Tk.pm
> line 247
> Tk::Button::butUp at
> /usr/lib64/perl5/vendor_perl/5.8.0/x86_64-linux-thread-multi/Tk/Button.pm
> line 111
> <ButtonRelease-1>
> (command bound to event)
>
> Do you remember what you did when that happen?
>
> BTW, on your headnode, how many network cards do you have? Do you have 2
> where one is on your university LAN and the other is local to your cluster
> nodes?
>
> Also, what network cards is on your compute node, they support PXE-boot
> right?
>
> P.S. When replying, please hit on "reply all" such that the message gets
> sent back to the oscar-users mailing-list and can be archived.
>
> Thanks,
>
> Bernard
>
> ________________________________
>
> From: Michelle Chu [mailto: [EMAIL PROTECTED]]
> Sent: Mon 20/03/2006 20:03
>
> To: Bernard Li
> Subject: Re: [Oscar-users] client installations problem
>
>
>
> Bernard,
> I am attaching the installation log file. I did enable dhcpd and manully
> assign each recoginized MAC address to each client name, such as
> oscarnode1.domainname...
> Thanks,
>
> Michelle
>
> On 3/20/06, Bernard Li < [EMAIL PROTECTED]> wrote:
> >
> >
> >
> > Instead of us trying to guess what you've done, can you perhaps post your
> oscarinstall.log (located in /opt/oscar) before we continue with
> troubleshooting?
> >
> > A few more questions:
> > - did you enable DHCP?
> > - did you assign the MAC address of the node to the node that was defined?
> >
> > Cheers,
> >
> > Bernard
> >
> > ________________________________
> From: Michelle Chu [mailto:[EMAIL PROTECTED]]
> > Sent: Mon 20/03/2006 19:02
> > To: Bernard Li
> > Subject: Re: [Oscar-users] client installations problem
> >
> >
> >
> >
> > Bernard,
> > Thank you so much for you reply. Yes. I did this step before clicking the
> close button in setup networking. Any other suggestion? Michelle
> >
> >
> > On 3/20/06, Bernard Li <[EMAIL PROTECTED]> wrote:
> > >
> > >
> > > Hi Michelle:
> > >
> > > In the "Setup Networking" step, there is a button which reads "Setup
> network boot" - did you happen to click it?
> > >
> > > Cheers,
> > >
> > > Bernard
> > >
> > >
> > > ________________________________
> From: [EMAIL PROTECTED] [mailto:
> [EMAIL PROTECTED]] On Behalf Of
> Michelle Chu
> > > Sent: Monday, March 20, 2006 16:12
> > > To: [email protected]
> > > Subject: [Oscar-users] client installations problem
> > >
> > >
> > >
> > >
> > > Hey, there,
> > >
> > > I encountered problem after setup networking and netboot the client
> nodes. Client node shows:
> > >
> > > client IP: 10.1.1.2 Mask: 255.255.255.0
> > > DHCP IP 10.1.1.1 Gateway IP: 10.1.1.1
> > > PXE-E32
> > > TFTP open timeout
> > > TFTP...
> > > Eventually timeout
> > >
> > > The tftp at server node is on by typing: chkconfig tftp on
> > > I also disable iptables by typing: chkconfig --level=2345 iptables off
> > >
> > > I guess there might be some problem with the firewall settings. Any
> ideas??
> > >
> > > Michelle
> > >
> > >
> > >
> > >
> > >
> >
> >
>
>
