Dear all,

 

i've got some strange error message after successfully finishing Step 3
"Install OSCAR Server" and restarting the cluster GUI on my CentOS 4.4
installation.

 

./install_cluster eth0

--> Setting env variable OSCAR_UI to gui

Checking your system...

Success: debrepo-check.pl

Success: su-check.pl

 --------------------------------------------------

 ERROR: it seems the interface used is not the one

 assigned to OSCAR in /etc/hosts

 --------------------------------------------------

 -----------------------------------

  /opt/oscar-5.0/scripts/system-sanity.d/network-check.pl

  Network configuration not correct

 -----------------------------------

Failure: network-check.pl

Success: selinux-check.pl

Success: ssh-check.pl

ERROR: There are basic system configuration issues (see log).

 

 

The installation works great and without any problems till restarting OSCAR
GUI after Step-3 "Installing OSCAR Server".

During processing Step-3, I saw messages like 

 

============================================================================
=

== Running step 3 of the OSCAR wizard: Install OSCAR server packages

============================================================================
=

 

--> Step 3: Running: ./install_server eth0

--> Getting internal IP address

--> Got: [IP 192.168.0.246]

--> Got: [broadcast 192.168.0.255]

--> Got: [netmask 255.255.255.0]

--> Adding hosts to /etc/hosts

Backing up /etc/hosts

Adding required entries to /etc/hosts

--> Identified non-core packages: openmpi pvm netbootmgr opium loghost
torque mta-config ntpconfig mpich ganglia lam maui disable-services

--> Installing server non-core packages (core packages already installed)

--> Smart_install:
openmpi,openmpi-switcher-modulefile,pvm,pvm-modules-oscar,netbootmgr,ssh-osc
ar,loghost,torque,torque-client,torque-gui,torque-modulefile,torque-mom,torq
ue-server,ntp,mpich-ch_p4-gcc-oscar,mpich-ch_p4-gcc-oscar-module,ganglia-gme
tad,ganglia-gmond,ganglia-web,php-gd,rrdtool,lam-oscar,lam-oscar-modulefile,
lam-switcher-modulefile,libaio,libaio-devel,maui-oscar

--> Successfully installed server non-core RPMs

--> Marking installed bit in ODA for server non-core RPMS

--> Done marking installed bits in ODA

--> Running post_server_install scripts for server non-core packages

Setting systemimager-server-netboodmond to NET_BOOT_DEFAULT=local

Stopping SystemImager's net boot client monitor: si_netbootmond.

Starting SystemImager's net boot client monitor: si_netbootmond.

Shutting down TORQUE Server: FAILED

Starting TORQUE Server: _

[torque] ...updating xpbsmonrc file

WARNING: OSCAR does not know how to configure sendmail yet.

WARNING: Please bug the OSCAR developers to finish the mta-config package!

WARNING: There will be no mail service running on the client nodes!

Shutting down ntpd: FAILED

Starting ntpd: _

Shutting down GANGLIA gmond: _

editing /etc/gmond.conf

[ganglia] Changed line:   name = "OSCAR Cluster"

[ganglia] Changed line:   owner = "OSCAR"

[ganglia] Changed line:   port = 8649

[ganglia] Changed line:   port = 8649

[ganglia] Ganglia gmond configuration file modified, re-starting daemon...

Shutting down GANGLIA gmond: FAILED

Starting GANGLIA gmond: _

[ganglia] Adding default route for multicast to go through eth0.

[ganglia] Ganglia gmond configuration file modified, re-starting daemon...

Shutting down GANGLIA gmond: _

Starting GANGLIA gmond: _

editing /etc/gmetad.conf

match: gridname\s+.*

match: data_source\s+.*

[ganglia] Ganglia gmetad configuration file modified, re-starting daemon...

Shutting down GANGLIA gmetad: _

Starting GANGLIA gmetad: _

[ganglia] Starting up apache...

Stopping httpd: _

Starting httpd: _

[ganglia] Ganglia page is located at http://metacomp.samba.local/ganglia/

--> Successfully ran server non-core package post_server_install scripts

--> Updating /etc/exports

Backing up /etc/exports

Checking for /home export

Adding /home export

--> Updating rsyncd.conf

Backing up rsyncd header stub

Found hosts allow stanza

Adding hosts allow to file

Updated rsyncd.conf file

--> Refreshing services

Shutting down NFS mountd: FAILED

Shutting down NFS daemon: FAILED

Shutting down NFS quotas: FAILED

Shutting down NFS services:  _

Starting NFS services:  _

Starting NFS quotas: _

Starting NFS daemon: _

Starting NFS mountd: _

Starting sshd:_

--> Fixing root "dot" files

Making any necessary PATH fixes to (/root/.bashrc)

Making any necessary PATH fixes to (/root/.tcshrc)

Making any necessary PATH fixes to (/root/.cshrc)

--> Finished server_prep script

--> Step 3: Successfully installed OSCAR server

--> Update Wizard Env (as needed)

--> Successfully ran oscar_wizard

--> Successfully ran OSCAR install_cluster script

 

I did the installation several times on different machines, some with two
Ethernet adapter card, some with only one Ethernet Adapter.

The configuration for /etc/host looks like this.

 

# Do not remove the following line, or various programs

# that require network functionality will fail.

127.0.0.1         localhost.localdomain   localhost

192.168.0.246     metacomp.samba.local metacomp oscar_server nfs_oscar
pbs_oscar

 

Internet, rdesktop, ftp etc. works fine and without any problems.

 

Do I have to add additional alias like OSCAR or oscar cluster to my host
file, or . ????

 

 

Regards 

 

Peter Rottmann

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Oscar-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/oscar-users

Reply via email to