Hi Jim, I am not sure what you have done on your /etc/hosts when the nic was removed and then added back but all OSCAR cares about in terms of torque/pbs behavior is see if /etc/hosts can find the PBS server or not.
So, if "pbs_oscar" was assigned to the IP of the your proper PBS server on /etc/hosts, most of your torque problem would be gone. Regards, - DongInn Jim Summers wrote: > > DongInn Kim wrote: >> Hi Jim, >> >> Can you copy and paste your /etc/hosts on your head node? >> All I need is the line with your head node's IP. > > Actually it has two ip's. Here is the line for the nic to the private subnet > that the compute nodes are on: > > 192.168.0.32 master oscar_server nfs_oscar pbs_oscar > > and then there is a line for the world ip address / hostname. > > I did try moving pbs_oscar to be the first name but it still had no affect. > > It seems like a couple of years ago when I installed a cluster with oscar I > eventually had remove a nic and do everything with just the private network. > Then when it was working as expected I added the second nic back in and it > was > still happy. But I figured that had been fixed by now and actually forgot > about it until today. > > What do you think? > > Thanks > >> Regards, >> >> - DongInn >> >> >> Jim Summers wrote: >>> Hello All, >>> >>> I have proceeded on with my cluster install. Got the nodes installed and >>> when >>> running step 7, "Complete Cluster Setup", I eventually start getting the >>> following messages: >>> >>> [torque] Updating pbs_server nodes >>> /opt/pbs/bin/pbsnodes: Server has no node list >>> qmgr obj=node1.oscardomain svr=default: Unauthorized Request >>> create node node1.oscardomain np = 2 , properties = all >>> qmgr obj=node2.oscardomain svr=default: Unauthorized Request >>> create node node2.oscardomain np = 2 , properties = all >>> qmgr obj=node4.oscardomain svr=default: Unauthorized Request >>> create node node4.oscardomain np = 2 , properties = all >>> qmgr obj=node5.oscardomain svr=default: Unauthorized Request >>> create node node5.oscardomain np = 2 , properties = all >>> qmgr obj=node6.oscardomain svr=default: Unauthorized Request >>> create node node6.oscardomain np = 2 , properties = all >>> qmgr obj=node7.oscardomain svr=default: Unauthorized Request >>> create node node7.oscardomain np = 2 , properties = all >>> qmgr obj=node8.oscardomain svr=default: Unauthorized Request >>> >>> >>> This goes on for all nodes. >>> >>> I am stumped as to what I overlooked. I ran through all of the previous >>> steps >>> to see if I missed something, but I could not find it. >>> >>> If I try to use qmgr interactively, it won't allow me to do anything. I >>> have >>> forgotten how to authenticate to pbs I guess. >>> >>> Ideas / Suggestions? >>> >>> Thanks >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2008. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> Oscar-users mailing list >> Oscar-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/oscar-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Oscar-users mailing list Oscar-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/oscar-users
