Hi!
Here is how my /etc/hosts file looks at present:
******************************************************************
127.0.0.1 localhost.localdomain localhost
192.168.1.254 snode0.gnlserv01 snode0 oscar_server nfs_oscar pbs_oscar
137.215.104.218 gnlserv01.up.ac.za gnlserv01
# These entries are managed by SIS, please don't modify them.
192.168.1.1 normnode01.gnlserv01 normnode01
*****************************************************************
I read somewhere that it is better to assign the name of the local network
as hostname for the server due to software (MPI) related reasons. But for
all that I know, that might not have been a very good source, or it might be
outdated by now.
Should I perhaps change the domain of normnode01 to gnlserv01.up.ac.za ?
On Thu, Mar 12, 2009 at 4:07 PM, Michael Edwards <miedw...@gmail.com> wrote:
> See if your /etc/hosts looks something like the suggestions here:
>
> http://svn.oscar.openclustergroup.org/trac/oscar/wiki/TipTwoNetworkInterfaces
>
> It is a bit counter intuitive, but that is the way torque likes it.
>
>
> On Thu, Mar 12, 2009 at 7:08 AM, Marion Randall <ranmar...@gmail.com>wrote:
>
>> Hi!
>>
>> Yes. I am.
>> Here are some specifics:
>>
>> [r...@gnlserv01 server_logs]# ifconfig -a
>> eth0 Link encap:Ethernet HWaddr 00:1C:C0:AF:10:18
>> inet addr:192.168.1.254 Bcast:192.168.255.255 Mask:255.255.0.0
>> inet6 addr: fe80::21c:c0ff:feaf:1018/64 Scope:Link
>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>> RX packets:492293 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:794554 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:1000
>> RX bytes:36007564 (34.3 MiB) TX bytes:858225391 (818.4 MiB)
>> Base address:0x30c0 Memory:e0300000-e0320000
>>
>> eth1 Link encap:Ethernet HWaddr 00:1B:21:2C:70:C2
>> inet addr:137.215.104.218 Bcast:137.215.104.255
>> Mask:255.255.255.0
>> inet6 addr: fe80::21b:21ff:fe2c:70c2/64 Scope:Link
>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>> RX packets:228864 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:55044 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:100
>> RX bytes:43917228 (41.8 MiB) TX bytes:14417765 (13.7 MiB)
>> Base address:0x1000 Memory:e0020000-e0040000
>>
>> :-)
>>
>> Rion
>>
>>
>>
>> On Thu, Mar 12, 2009 at 1:02 PM, Michael Edwards <miedw...@gmail.com>wrote:
>>
>>> Are you using two NICs on the head node (one internal and one external)?
>>>
>>>
>>> On Thu, Mar 12, 2009 at 5:59 AM, Marion Randall <ranmar...@gmail.com>wrote:
>>>
>>>> Hi !
>>>>
>>>> OSCAR 5.1rc1 as far as I know.
>>>>
>>>> :-)
>>>>
>>>> Rion
>>>>
>>>>
>>>>
>>>> On Thu, Mar 12, 2009 at 11:48 AM, Allan Menezes <
>>>> amenezes...@sympatico.ca> wrote:
>>>>
>>>>> Hi,
>>>>> Which version of OSCAR 5.1 are you using OSCAR 5.1b2 or OSCAR
>>>>> 5.1rc18047?
>>>>> Allan
>>>>> Marion Randall wrote:
>>>>>
>>>>> Hi!
>>>>>
>>>>> For certain reasons I couldn't use the new OSCAR version and a
>>>>> supported distro for it. However, I was wondering whether there might be
>>>>> anyone who had the same error with OSCAR 5.1 similar to the output I've
>>>>> included below. I'm desperate enough to run the start_over script but I'm
>>>>> not sure whether I will get the same problem when I come to step 7 or not.
>>>>> In other words, I'm not sure whether I configured something incorrectly,
>>>>> or
>>>>> whether it's something else that needs to be changed.
>>>>>
>>>>> Thanks!
>>>>>
>>>>>
>>>>> =============================================================================
>>>>> == Running step 7 of the OSCAR wizard: Complete cluster setup
>>>>>
>>>>> =============================================================================
>>>>>
>>>>> --> Update Wizard Env (as needed)
>>>>> --> Step 7: Running: ./post_install
>>>>> Gathering processor count from normnode01.gnlserv01.
>>>>> Updating database for machine normnode01.gnlserv01 cpus=2.
>>>>> --> About to run /var/lib/oscar/packages/ganglia/post_install for
>>>>> ganglia
>>>>> Checking if the OPKG has to be excluded...
>>>>> OPKG ganglia: Analysing default values
>>>>> [ganglia] Ganglia gmond configuration file modified, re-starting
>>>>> daemon...
>>>>> Shutting down GANGLIA gmond: [ OK ]
>>>>> Starting GANGLIA gmond: [ OK ]
>>>>> editing /etc/gmetad.conf
>>>>> match: gridname\s+.*
>>>>> match: data_source\s+.*
>>>>> [ganglia] Ganglia gmetad configuration file modified, re-starting
>>>>> daemon...
>>>>> Shutting down GANGLIA gmetad: [ OK ]
>>>>> Starting GANGLIA gmetad: [ OK ]
>>>>> [ganglia] Starting up apache...
>>>>> Stopping httpd: [ OK ]
>>>>> Starting httpd: [ OK ]
>>>>> [ganglia] Ganglia page is located at http://gnlserv01/ganglia/
>>>>> ************************* oscar_cluster *************************
>>>>> --------- normnode01---------
>>>>> Shutting down GANGLIA gmond: [ OK ]
>>>>> Starting GANGLIA gmond: [ OK ]
>>>>> --> About to run /var/lib/oscar/packages/mtaconfig/api-post-deploy for
>>>>> mtaconfig
>>>>> ************************************ WARNING
>>>>> ************************************
>>>>> OSCAR could not set up the configuration for any mailing service on the
>>>>> server.
>>>>> The current version of the mta-config package in OSCAR only supports
>>>>> the Postfix mail transfer agent (MTA).
>>>>> It looks like you have another MTA installed (e.g, sendmail or exim);
>>>>> as such,
>>>>> please be aware that OSCAR will not automatically configure it.
>>>>> ************************************ WARNING
>>>>> ************************************
>>>>> --> About to run /var/lib/oscar/packages/ntpconfig/api-post-deploy for
>>>>> ntpconfig
>>>>> Shutting down ntpd: [ OK ]
>>>>> Starting ntpd: [ OK ]
>>>>> ************************* oscar_cluster *************************
>>>>> --------- normnode01---------
>>>>> Shutting down ntpd: [ OK ]
>>>>> ntpd: Synchronizing with time server: [FAILED]
>>>>> Starting ntpd: [ OK ]
>>>>> --> About to run /var/lib/oscar/packages/oda/api-post-deploy for oda
>>>>> generating the /etc/odaserver file on all oscar clients
>>>>> . /etc/profile.d/c3.sh && cexec 'echo oscar_server > /etc/odaserver'
>>>>> ************************* oscar_cluster *************************
>>>>> --------- normnode01---------
>>>>> --> About to run /var/lib/oscar/packages/opium/api-post-deploy for
>>>>> opium
>>>>> image:
>>>>> $VAR1 = 'fedora-8-x86_64';
>>>>> ---------------
>>>>> gexec_cluster() XML_ParseBuffer() error at line 1:
>>>>> no element found
>>>>>
>>>>> image:
>>>>> $VAR1 = 'fedora-8-x86_64';
>>>>> ---------------
>>>>> gexec_cluster() XML_ParseBuffer() error at line 1:
>>>>> no element found
>>>>>
>>>>> image:
>>>>> $VAR1 = 'fedora-8-x86_64';
>>>>> ---------------
>>>>> gexec_cluster() XML_ParseBuffer() error at line 1:
>>>>> no element found
>>>>>
>>>>> image:
>>>>> $VAR1 = 'fedora-8-x86_64';
>>>>> ---------------
>>>>> gexec_cluster() XML_ParseBuffer() error at line 1:
>>>>> no element found
>>>>>
>>>>> image:
>>>>> $VAR1 = 'fedora-8-x86_64';
>>>>> ---------------
>>>>> gexec_cluster() XML_ParseBuffer() error at line 1:
>>>>> no element found
>>>>>
>>>>> image:
>>>>> $VAR1 = 'fedora-8-x86_64';
>>>>> ---------------
>>>>> gexec_cluster() XML_ParseBuffer() error at line 1:
>>>>> no element found
>>>>>
>>>>> --> About to run /var/lib/oscar/packages/switcher/api-post-deploy for
>>>>> switcher
>>>>> Undefined subroutine &package_config::get_packages_switcher called at
>>>>> /var/lib/oscar/packages/switcher/package_config.pm line 36.
>>>>> --> About to run /var/lib/oscar/packages/torque/api-post-deploy for
>>>>> torque
>>>>> [torque] Updating pbs_server nodes
>>>>> /opt/pbs/bin/pbsnodes: Server has no node list MSG=node list is empty
>>>>> qmgr obj=normnode01.gnlserv01 svr=default: Unauthorized Request
>>>>> create node normnode01.gnlserv01 np = 2 , properties = all
>>>>> Shutting down TORQUE Server: [ OK ]
>>>>> Starting TORQUE Server: [ OK ]
>>>>> [torque] Creating TORQUE workq queue...
>>>>> Max open servers: 4
>>>>> qmgr obj=workq svr=default: Unauthorized Request
>>>>> create queue workq
>>>>> Configuration of TORQUE queues failed, check the logs at /var/spool/pbs
>>>>> at /var/lib/oscar/packages/torque/api-post-deploy line 316
>>>>> Script /var/lib/oscar/packages/torque/api-post-deploy exitted badly
>>>>> with exit code '2' at ./post_install line 49
>>>>> Couldn't run 'post_install' script for torque at ./post_install line 50
>>>>> Some of the post install scripts failed, please check your logs for
>>>>> more info at ./post_install line 55
>>>>> --> Step 7: Failed to properly complete the cluster install; please
>>>>> check the logs
>>>>> --> Update Wizard Env (as needed)
>>>>>
>>>>>
>>>>> :-)
>>>>>
>>>>> Rion
>>>>> --
>>>>> "O wretched man that I am! Who will deliver me from this body of death?
>>>>> I thank God - through Jesus Christ our Lord! So then, with the mind I
>>>>> myself
>>>>> serve the law of God, but with the flesh the law of sin." Rom.7:24-25
>>>>>
>>>>> ------------------------------
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
>>>>> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
>>>>> easily build your RIAs with Flex Builder, the Eclipse(TM)based development
>>>>> software that enables intelligent coding and step-through debugging.
>>>>> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
>>>>>
>>>>> ------------------------------
>>>>>
>>>>> _______________________________________________
>>>>> Oscar-users mailing
>>>>> listoscar-us...@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/oscar-users
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
>>>>> powering Web 2.0 with engaging, cross-platform capabilities. Quickly
>>>>> and
>>>>> easily build your RIAs with Flex Builder, the Eclipse(TM)based
>>>>> development
>>>>> software that enables intelligent coding and step-through debugging.
>>>>> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
>>>>> _______________________________________________
>>>>> Oscar-users mailing list
>>>>> Oscar-users@lists.sourceforge.net
>>>>> https://lists.sourceforge.net/lists/listinfo/oscar-users
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> "O wretched man that I am! Who will deliver me from this body of death?
>>>> I thank God - through Jesus Christ our Lord! So then, with the mind I
>>>> myself
>>>> serve the law of God, but with the flesh the law of sin." Rom.7:24-25
>>>>
>>>>
>>>> ------------------------------------------------------------------------------
>>>> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
>>>> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
>>>> easily build your RIAs with Flex Builder, the Eclipse(TM)based
>>>> development
>>>> software that enables intelligent coding and step-through debugging.
>>>> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
>>>> _______________________________________________
>>>> Oscar-users mailing list
>>>> Oscar-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/oscar-users
>>>>
>>>>
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
>>> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
>>> easily build your RIAs with Flex Builder, the Eclipse(TM)based
>>> development
>>> software that enables intelligent coding and step-through debugging.
>>> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
>>> _______________________________________________
>>> Oscar-users mailing list
>>> Oscar-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/oscar-users
>>>
>>>
>>
>>
>> --
>> "O wretched man that I am! Who will deliver me from this body of death? I
>> thank God - through Jesus Christ our Lord! So then, with the mind I myself
>> serve the law of God, but with the flesh the law of sin." Rom.7:24-25
>>
>>
>> ------------------------------------------------------------------------------
>> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
>> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
>> easily build your RIAs with Flex Builder, the Eclipse(TM)based development
>> software that enables intelligent coding and step-through debugging.
>> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
>> _______________________________________________
>> Oscar-users mailing list
>> Oscar-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/oscar-users
>>
>>
>
>
> ------------------------------------------------------------------------------
> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
> easily build your RIAs with Flex Builder, the Eclipse(TM)based development
> software that enables intelligent coding and step-through debugging.
> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
> _______________________________________________
> Oscar-users mailing list
> Oscar-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/oscar-users
>
>
--
"O wretched man that I am! Who will deliver me from this body of death? I
thank God - through Jesus Christ our Lord! So then, with the mind I myself
serve the law of God, but with the flesh the law of sin." Rom.7:24-25
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Oscar-users mailing list
Oscar-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oscar-users
